Trigger

Commands that provide access to trigger functionality.

Get Current State

Get the current state of the instrument's channel

Command

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects to apply to the trigger channel.
      • command - (String) - The Get Current State command: “getCurrentState”

Response

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects applied to the trigger channel.
      • command - (String) - The Get Current State command: “getCurrentState”
      • statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
      • wait - (Integer) - The number of ms to wait before the device is ready to process another command.
      • acqCount - (Integer) - The current acquisition count. This value increments each time an acquisition completes.
      • source - (Object) - The trigger source and configuration.
        • instrument - (String) - The instrument to trigger on (ex. “osc”, “la”).
        • channel - (Integer) - The instrument channel to trigger on.
        • type - (String) - The trigger type: “risingEdge”, “fallingEdge”.
        • lowerThreshold - (Integer) - The trigger threshold lower value in mV.
        • upperThreshold - (Integer) - The trigger threshold upper value in mV.
        • risingEdgeMask - (Integer) - The rising edge trigger mask.
        • fallingEdgeMask - (Integer) - The falling edge trigger mask.
      • targets - (Object) - An object containing instrument channels to use during the acquisition.
        • <instrument> - (Array<Integer>) - An array of channel numbers to use during the acquisition for the specified <instrument> (ex. “osc”, “la”)
      • state - (String) - The trigger state: “idle” “armed”, “acquiring”, “triggered”, or “busy”
        idle - The trigger is not armed, acquiring or triggered.
        armed - The trigger had been armed but the trigger condition has not yet been met.
        acquiring - The trigger condition has been meet and data is currently being acquired.
        triggered - The trigger condition has been met but data is not yet begin acquired (this is typically due to a trigger delay).
        busy - The trigger is busy waiting or doing something else

Example

Command 

{
    "trigger": {
        "1": [
            {
                "command": "getCurrentState"
            }
        ]
    }
}

Response 

{
    "trigger": {
        "1": [
            {
                "command": "getCurrentState",
                "statusCode": 0,                
                "wait": 0,
                "acqCount": 10,
                "source": {
                    "instrument": "osc",
                    "channel": 1,
                    "type": "risingEdge",
                    "lowerThreshold": 0,
                    "upperThreshold": 30,
                    "risingEdgeMask": 0x3FF,
                    "fallingEdgeMask": 0x3FF
                },
                "targets": {
                    "osc": [1, 2],
                    "la": [1]
                },
                "state": "idle"
            }
        ]
    }
}


Force Trigger

Force an immediate acquisition without waiting for a trigger condition.

Command

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects to apply to the trigger channel.
      • command - (String) - The Force Trigger command: “forceTrigger”

Response

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects applied to the trigger channel.
      • command - (String) - The Force Trigger command: “forceTrigger”
      • statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
      • wait - (Integer) - The number of ms to wait before the device is ready to process another command.
      • acqCount - (Integer) - The current acquisition count. This value increments each time an acquisition completes.

Example:

Command 

{
   "trigger":{
      "1":[
         {
            "command":"forceTrigger"
         }
      ]
   }
}

Response 

{  
   "trigger":{  
      "1":[  
         {  
            "command":"forceTrigger",
            "statusCode":0,            
            "wait": -1,
            "acqCount": 27
         }
      ]
   }
}



Set Parameters

Set the device trigger parameters.

Command

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects to apply to the trigger channel.
      • command - (String) - The Set Parameters command: “setParameters”
      • source - (Object) - The trigger source and configuration.
        • instrument - (String) - The instrument to trigger on (ex. “osc”, “la”).
        • channel - (Integer) - The instrument channel to trigger on.
        • type - (String) - The trigger type: “risingEdge”, “fallingEdge”.
        • lowerThreshold - (Integer) - The trigger threshold lower value in mV.
        • upperThreshold - (Integer) - The trigger threshold upper value in mV.
        • risingEdgeMask - (Integer) - The rising edge trigger mask. Only applicable when the trigger source is set to LA.
        • fallingEdgeMask - (Integer) - The falling edge trigger mask. Only applicable when the trigger source is set to LA.
      • * targets - (Object) - An object containing instrument channels to use during the acquisition.
        • <instrument> - (Array<Integer>) - An array of channel numbers to use during the acquisition for the specified <instrument> (ex. “osc”, “la”)

Response

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects applied to the trigger channel.
      • command - (String) - TThe Set Parameters command: “setParameters”
      • statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
      • wait - (Integer) - The number of ms to wait before the device is ready to process another command.

Example:

Command 

{
    "trigger": {
        "1": [
            {
                "command": "setParameters",
                "source": {
                    "instrument": "osc",
                    "channel": 1,
                    "type": "risingEdge",
                    "lowerThreshold": 3300,
                    "upperThreshold": 4000,
                    "risingEdgeMask": 1,
                    "fallingEdgeMask": 0
                },
                "targets": {
                    "osc": [
                        1,
                        2
                    ],
                    "la": [
                        1
                    ]
                }
            }
        ]
    }
}

Response 

{  
   "trigger":{  
      "1":[  
         {  
            "command":"setParameters",
            "statusCode":0,      
            "wait":0
         }
      ]
   }
}



Run

Arm the specified trigger and immediately re-arm the trigger after a successful acquisition.

Command

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects to apply to the trigger channel.
      • command - (String) - The Run command: “run”

Response

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects applied to the trigger channel.
      • command - (String) - The Run command: “run”
      • statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
      • wait - (Integer) - The number of ms to wait before the device is ready to process another command.
      • acqCount - (Integer) - The current acquisition count. This value increments each time an acquisition completes.

Example:

Command 

{
   "trigger":{
      "1":[
         {
            "command":"run"
         }
      ]
   }
}

Response 

{  
   "trigger":{  
      "1":[  
         {  
            "command":"run",
            "statusCode":0,
            "wait":-1,            
            "acqCount": 27
         }
      ]
   }
}



Single

Arm the specified trigger and do not re-arm the trigger after a successful acquisition.

Command

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects to apply to the trigger channel.
      • command - (String) - The Single command: “single”

Response

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects applied to the trigger channel.
      • command - (String) - The Single command: “single”
      • statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
      • wait - (Integer) - The number of ms to wait before the device is ready to process another command.
      • lastAcqCount - (Integer) - The previous acquisition count value.

Example:

Command 

{
   "trigger":{
      "1":[
         {
            "command":"single"
         }
      ]
   }
}

Response 

{  
   "trigger":{  
      "1":[  
         {  
            "command":"single",            
            "statusCode":0,
            "wait":-1,
            "lastAcqCount": 27
         }
      ]
   }
}



Stop

Disarm the specified trigger.

Command

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects to apply to the trigger channel.
      • command - (String) - The Stop command: “stop”.

Response

  • trigger - (Object) - The trigger object.
    • # - (Array<Object>) - An array of command objects applied to the trigger channel.
      • command - (String) - The Stop command: “stop”.
      • statusCode - (Integer) - A numeric value representing the device status. See Digilent Instrumentation Protocol Status Codes
      • wait - (Integer) - The number of ms to wait before the device is ready to process another command.

Example:

Command 

{
   "trigger":{
      "1":[
         {
            "command":"stop"
         }
      ]
   }
}

Response 

{  
   "trigger":{  
      "1":[  
         {  
            "command":"stop",
            "statusCode":0,
            "wait": 0
         }
      ]
   }
}