Cmod S6
Buy
Reference Manual
Technical Support
Cmod S6
Breadboardable Spartan-6 FPGA Module
Features
- On-board Adept USB2 port for configuration, test and communications interfaces.
Key Specifications
Logic Cells
3,840 (6 LUTs)
Block RAM
216Kb
DSP Slices
8
CMTs
2 (4 DCMs and one PLL)
Quad-SPI Flash
16MB
Connectivity and On-board I/O
GPIO
46 signals brought to DIP pins
LEDs
4
Buttons
2
Clock Inputs
2
Electrical
Power
USB or power source connected
to DIP pin 24 (5-15V)
to DIP pin 24 (5-15V)
Logic Level
3.3V
Physical
Width
0.7 in
Length
2.6 in
The Cmod S6 is no longer in production. Once the current stock is depleted, it will be discontinued.
The Digilent Cmod S6 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 6 LX4 FPGA. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, and basic I/O devices. There are 46 FPGA I/O signals that are routed to 100-mil-spaced through-hole pins, making the Cmod S6 well suited for use with solderless breadboards. At just .7” by 2.6” inches, it can also be loaded in a standard socket and used in embedded systems.