Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
zmod:scope:start [2022/09/12 11:43] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.comzmod:scope:start [2022/10/04 04:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
  
 +   
 +====== Zmod Scope ======
 +   
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/zmod-scope-1410-2-channel-14-bit-oscilloscope-module/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/4-fpga/
 +| Title = Zmod Scope
 +| Subtitle =  SYZYGY-compatible Dual-channel 14-bit Analog-to-Digital Converter Module
 +| Header = Features
 +| Channels = 2
 +| Channel type = Single-ended
 +| Resolution = 14-bit
 +| Input Range = ±1V (High Gain) or \\ ±25V (Low Gain)
 +| Absolute Resolution = 0.13mV (High Gain) or \\ 3.21mV (Low Gain)
 +| Sample Rate = 100MS/s (Real Time)
 +| Input Impedance = 1MΩ||18pF
 +| Analog Bandwidth = 70 MHz+ @ 3dB \\ 30 MHz @ 0.5dB \\ 20 MHz @ 0.1dB
 +| Input Protected To = ±50V
 +| Header = SYZYGY™ Compatibility
 +| Version = Syzygy 1.1 \\ Syzygy DNA 1.1
 +| Compatibility Table = [[reference-manual#the_syzygy_compatibility_table|In Reference Manual]]
 +| Header = Physical Dimensions
 +| Width = 45 mm
 +| Length = 70 mm
 +| Header = Product Compliance
 +| HTC = 8473301180
 +| ECCN = EAR99
 +}}
 +
 +
 +{{page>reference-manual}} \\ \\
 + 
 +===== Getting Started =====
 +As of the time of writing, two different versions of the supporting materials for the Zmod Scope exist.
 +=== Latest Release ===
 +The Zmod Scope Controller is the second release of the low-level controller IP. As of the time of writing, this IP is not compatible with the AXI Adapter or Zmod Library. All variants within the Zmod Scope family are supported. 
 +
 +For a project demonstrating its use, see the [[/programmable-logic/eclypse-z7/demos/low-level-low-pass-filter]].
 +----
 +=== Initial Release ===
 +The initial release of demos for the Eclypse and Zmod Scope uses the Zmod Library to control the Zmod Scope through the Zmod ADC1410 AXI Adapter and Zmod ADC 1410 Low Level Controller IPs. These IPs are **only** compatible with the Zmod Scope 1410-105 (formerly the Zmod ADC 1410).
 +
 +For information on getting started with the Zmod Library, and for using these IPs, check Section 3 of the [[/zmod/zmodbaselibraryuserguide]]. These IPs and the Zmod Library are also used in demos for the USB104 A7, which you can find through its [[/programmable-logic/usb104a7/start|Resource Center]].
 +----
 +===== Documentation =====
 +  * [[zmod:scope:reference-manual]]
 +  * {{ :reference:zmod:zmodadc:zmod_scope_sch_public.pdf|Zmod Scope Schematic}}
 +
 +  * [[https://github.com/Digilent/vivado-library/blob/zmod/v2/2019.1-2/ip/Zmods/ZmodScopeController/docs/ZmodScopeController.pdf|Zmod Scope Controller IP Core User Guide]]
 +  * [[https://github.com/Digilent/vivado-library/blob/zmod/v1/2019.1-2/ip/Zmods/AXI_Zmod_ADC1410/docs/ZmodADC1410AxiAdapter.pdf|Zmod ADC 1410 AXI Adapter User Guide]]
 +  * [[https://github.com/Digilent/vivado-library/blob/zmod/v1/2019.1-2/ip/Zmods/ZmodADC1410Controller/docs/ZmodADC1410LLC.pdf|Zmod ADC 1410 Low Level Controller User Guide]]
 +
 +  * [[/zmod/zmodbaselibraryuserguide]]
 +  * [[zmod:scope:zmodadc1410libraryuserguide]]
 +
 +----
 +===== Compatible Digilent Host Boards =====
 +  * [[programmable-logic:eclypse-z7:start]]
 +  * [[programmable-logic:genesys-zu:start]]
 +  * [[programmable-logic:usb104a7:start]]
 +
 +----
 +===== Tutorials =====
 +
 +These tutorials step through the process of creating a hardware platform that supports the Zmod ADC 1410. Prebuilt images for the Eclypse Z7 are available on the Digilent GitHub. The process of working with these prebuilt images is documented in Section 2 of the [[zmod:zmodbaselibraryuserguide|Zmod Base Library User Guide]].
 +
 +  * [[vivado:getting-started-with-ipi:start]]
 +  * [[learn:programmable-logic:tutorials:vivado-hierarchical-blocks:start|]]
 +  * [[programmable-logic:eclypse-z7:customizing-zmods-os]]
 +    * **Note**: //The os components needed for this guide are not available for the Genesys ZU//
 +
 +----
 +/*
 +===== Example Projects =====
 +
 +==Programmable Logic==
 +
 +
 +
 +----
 +*/
 +===== Additional Resources =====
 +
 +  * [[https://github.com/Digilent/vivado-library|Digilent's Vivado IP Library]]
 +    * //Contains IP cores supporting the Zmod Scope family.//
 +  * {{:reference:zmod:zmodadc:zmodadc_dimensions.zip|Mechanical Drawings}}
 +
 +
 +----
 +
 +{{tag>zmod zmod-start zmodadc resource-center}}