This is an old revision of the document!
Starting with the Analog Discovery
1. Hardware
To set up the Analog Discovery:
- First, install the Digilent WaveForms 3 software on your PC. See Installer Details for more information.
- Connect the Analog Discovery to your PC using a USB cable.
Pin-out:
| Recommended Operating Conditions | Absolute Maximum Ratings | |
|---|---|---|
| Oscilloscope (1+,1-,2+,2-) | ±50 V differential, ±25 V single ended | ±50 V |
| WaveGen (W1,W2) | ±5 V, 10 mA | ±5.8 V, 50 mA |
| Power Supplies (V+,V-) | +5 V, -5 V, 100 mA | +5.2 V, -5.2 V, 200 mA |
| Triggers, Digital IO (T1,T2,0,1,2,…) | LVCMOS 3.3 V, 4 mA | ± 20 V |
2. WaveForms Software
See Installer Details for information on installing WaveForms.
See WaveForms for information on using the software.