This is an old revision of the document!

Getting Started with Zynq and the Vivado IP Integrator

Warning

This page is a work in progress.

Prerequisites

  • Vivado Installed
  • Familiarity with Vivado
  • Digilent Board Files

Introduction

1. Create a new IPI Project

2. The IP Integrator

3. Add the Zynq Block

4. Configure the Zynq Block

5. Add an RGB LED Controller

6. Add a Button Controller

7. Connect the AXI Blocks to the Zynq Block

8. Validate the Design

9. Generate the Bitstream

10. Launch Vivado SDK

11. Create a New Project

12. Program and Run the Design