Differences

This shows you the differences between two versions of the page.

Link to this comparison view

vivado:getting_started:start [2020/03/16 22:57] – [9. The Hardware Manager] Arthur Brownvivado:getting_started:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 148: Line 148:
     * Tools for creating Block Designs     * Tools for creating Block Designs
   * //Simulation//   * //Simulation//
-    * Allows a developer to verify the output of their deisgn prior to programming their device+    * Allows a developer to verify the output of their design prior to programming their device
   * //RTL Analysis//   * //RTL Analysis//
     * lets the developer see how the tools are interpreting their code     * lets the developer see how the tools are interpreting their code
Line 259: Line 259:
 ==== 6. Adding a Constraint File ==== ==== 6. Adding a Constraint File ====
  
-In order to connect HDL code with the physical pins of the FPGA, a constraint file needs to be added or created. Digilent has produced a Xilinx Design Constraint (XDC) file for each of our boards. Download the [[https://github.com/Digilent/digilent-xdc/archive/master.zip|ZIP Archive]] containing each of these master XDC files, then extract it in a location you will remember.+In order to connect HDL code with the physical pins of the FPGA, a constraint file needs to be added or created. Digilent has produced a Xilinx Design Constraint (XDC) file for each of our boards. Download [[https://github.com/Digilent/digilent-xdc/archive/master.zip|digilent-xdc-master.zip]], the ZIP Archive containing each of these master XDC files, then extract it in a location you will remember.
  
 <WRAP group> <WRAP group>
Line 296: Line 296:
 <WRAP column half> <WRAP column half>
 === 6.4 === === 6.4 ===
-Make sure that the selected XDC file has been added into the list of sources, then click //Finish//.+Make sure that the selected XDC file has been added into the list of sources, and that the //Copy constraint files into project// is checked, then click //Finish//. 
 + 
 +**Note:** //Leaving the Copy... box unchecked means that any editing done to the constraint file will be reflected in the original copy. Checking the box is highly recommended//
 </WRAP> </WRAP>
 <WRAP column half> <WRAP column half>
Line 508: Line 510:
 You should now see one of the LEDs on your board blinking! You should now see one of the LEDs on your board blinking!
  
-Be sure to visit your board's resource center for more tutorials and demo projects. A link to each resource center can be found [[https://reference.digilentinc.com/reference/programmable-logic/start|here]].+Be sure to visit your board's resource center for more tutorials and demo projects. A link to each resource center can be found [[/programmable-logic/start|here]].
  
-{{tag>learn programmable-logic software tutorial vivado arty arty-a7 arty-s7 arty-z7 basys-3 cmod-a7 cmod-s7 cora-z7 genesys-2 nexys-4-ddr nexys-a7 nexys-video zybo-z7 zybo zedboard sword }}+{{tag>learn programmable-logic software tutorial vivado arty arty-a7 arty-s7 arty-z7 basys-3 cmod-a7 cmod-s7 cora-z7 genesys-2 nexys-4-ddr nexys-a7 nexys-video zybo-z7 zybo zedboard sword legacy}}