Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
test-and-measurement:openlogger:getting-started [2022/09/12 19:30] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.comtest-and-measurement:openlogger:getting-started [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== OpenLogger Getting Started Guide ======
  
 +Welcome to the getting started guide for the OpenLogger. This guide walks through getting the OpenLogger set up to start logging data, from installing all required software, to calibrating the device and updating its firmware. At the end of this guide, the Digilent Agent and Waveforms Live will be running and configured to work with an OpenLogger connected to the local computer. This whole process will take approximately 10 minutes.
 +
 +===== Set Up the Digilent Agent =====
 +
 +{{section>/learn/instrumentation/tutorials/openlogger/setup#Set Up the Digilent Agent}}
 +
 +===== Launch WaveForms Live and Connect the OpenLogger =====
 +
 +{{section>/learn/instrumentation/tutorials/openlogger/setup#Launch WaveForms Live and Connect the OpenLogger}}
 +
 +===== Update the OpenLogger's Firmware =====
 +
 +{{section>/learn/instrumentation/tutorials/openlogger/update-firmware#Required Update - First-Time Connection}}
 +
 +===== Calibrate the OpenLogger =====
 +{{section>/learn/instrumentation/tutorials/openlogger/calibration#First-Time Calibration}}
 +
 +===== Next Steps =====
 +
 +For more information on how to use the OpenLogger, take a look at some of the guides, tutorials, and projects available on the [[test-and-measurement:openlogger:start|OpenLogger's Resource Center]].
 +
 +If you have any questions, feel free to ask on the [[https://forum.digilentinc.com|Digilent Forums]] in the Scopes and Instruments subforum.
 +
 +----
 +
 +{{tag>gsg}}
 +{{include_n>1}}