Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
test-and-measurement:guides:waveforms-supplies [2021/05/14 23:05] – ↷ Page moved from reference:test-and-measurement:guides:waveforms-supplies to test-and-measurement:guides:waveforms-supplies Arthur Browntest-and-measurement:guides:waveforms-supplies [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 9: Line 9:
  
 On some devices with digital input/output pins, the //Power Supplies// instrument can also be used to set the logic standards that the device's digital I/O operates at. On some devices with digital input/output pins, the //Power Supplies// instrument can also be used to set the logic standards that the device's digital I/O operates at.
 +
 ---- ----
 ===== Prerequisites ===== ===== Prerequisites =====
   * A Digilent Test & Measurement Device with Variable Power Supplies   * A Digilent Test & Measurement Device with Variable Power Supplies
-    * [[reference:test-and-measurement:analog-discovery-pro-3x50:start|Analog Discovery Pro (ADP3450/ADP3250)]] +    * [[test-and-measurement:analog-discovery-pro-3x50:start|Analog Discovery Pro (ADP3450/ADP3250)]] 
-    * [[reference:test-and-measurement:analog-discovery-studio:start|Analog Discovery Studio]] +    * [[test-and-measurement:analog-discovery-studio:start|Analog Discovery Studio]] 
-    * [[reference:test-and-measurement:digital-discovery:start|Digital Discovery]] +    * [[test-and-measurement:digital-discovery:start|Digital Discovery]] 
-    * [[reference:test-and-measurement:analog-discovery-2:start|Analog Discovery 2]]+    * [[test-and-measurement:analog-discovery-2:start|Analog Discovery 2]]
     * //An Analog Discovery (Legacy) can also be used, however, its power supplies are not variable. The user interface for control of its power supplies is largely the same as for other devices.//     * //An Analog Discovery (Legacy) can also be used, however, its power supplies are not variable. The user interface for control of its power supplies is largely the same as for other devices.//
   * A Computer with WaveForms Software Installed   * A Computer with WaveForms Software Installed
  
 **Note:** //Images present in this guide represent the user interface as it appears for the Analog Discovery 2 and Analog Discovery Studio unless otherwise noted.// **Note:** //Images present in this guide represent the user interface as it appears for the Analog Discovery 2 and Analog Discovery Studio unless otherwise noted.//
 +
 +If you have an ADP5250, the UI for its power supplies is a little bit different than for the devices documented here. It is documented on a separate page, found here: [[test-and-measurement:guides:waveforms-readback-supplies]].
 +
 ---- ----
 ===== Guide ===== ===== Guide =====
Line 81: Line 85:
 If the Test & Measurement Device has differential analog input channels, make sure to connect the analog input channel negative pins, labeled "1-" (orange wire with white stripes) and "2-" (blue wire with white stripes) to the device's ground (black wire, marked with a down arrow). If the Test & Measurement Device has differential analog input channels, make sure to connect the analog input channel negative pins, labeled "1-" (orange wire with white stripes) and "2-" (blue wire with white stripes) to the device's ground (black wire, marked with a down arrow).
  
-**Note:** //The analog input channels can be used with BNC Cables if supported by your device. For more information, see the [[reference:test-and-measurement:guides:waveforms-oscilloscope]] guide.//+**Note:** //The analog input channels can be used with BNC Cables if supported by your device. For more information, see the [[test-and-measurement:guides:waveforms-oscilloscope]] guide.//
 </WRAP> <WRAP column half> </WRAP> <WRAP column half>
 {{ :learn:instrumentation:tutorials:analog-discovery-studio-supplies:power-supply-hw-setup.png?nolink&600 |}} {{ :learn:instrumentation:tutorials:analog-discovery-studio-supplies:power-supply-hw-setup.png?nolink&600 |}}
Line 203: Line 207:
  
 <html><center></html>//Analog Discovery Pro System Monitor//<html></center></html> <html><center></html>//Analog Discovery Pro System Monitor//<html></center></html>
----+----
 {{ :learn:instrumentation:tutorials:waveforms-supplies:analog-discovery-system-monitor.png?600 |}} {{ :learn:instrumentation:tutorials:waveforms-supplies:analog-discovery-system-monitor.png?600 |}}
  
Line 243: Line 247:
 </WRAP> </WRAP> </WRAP> </WRAP>
 ---- ----
-==== Next Steps ====+===== Next Steps =====
  
-For more guides on how to use the Digilent Test & Measurement Device, return to the device's Resource Center, linked from the [[reference:test-and-measurement:start]] page of this wiki.+For more guides on how to use the Digilent Test & Measurement Device, return to the device's Resource Center, linked from the [[test-and-measurement:start]] page of this wiki.
  
-If voltage values output by the //Supplies// are significantly different from expected, please calibrate the device by following the [[reference:test-and-measurement:guides:waveforms-calibration|Calibration Guide]].+If voltage values output by the //Supplies// are significantly different from expected, please calibrate the device by following the [[test-and-measurement:guides:waveforms-calibration|Calibration Guide]].
  
-For more information on WaveForms visit the [[reference:software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. +For more information on WaveForms visit the [[software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. 
  
 For technical support, please visit the [[https://forum.digilentinc.com/forum/8-test-and-measurement/|Test and Measurement]] section of the Digilent Forums. For technical support, please visit the [[https://forum.digilentinc.com/forum/8-test-and-measurement/|Test and Measurement]] section of the Digilent Forums.