Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
test-and-measurement:guides:waveforms-curve-tracer [2021/05/21 18:50] – [Using the WaveForms Curve Tracer] Arthur Browntest-and-measurement:guides:waveforms-curve-tracer [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 8: Line 8:
 ==== Hardware ==== ==== Hardware ====
  
-To use the //Tracer// instrument, you will have to set up a reference circuit. However, if you are using the Analog Discovery (Legacy) or Analog Discovery 2, you can instead take advantage of the Transistor Tester Adapter to create this circuit.+The //Tracer// instrument supports the ADP3450, Analog Discovery 2, Analog Discovery (Legacy) and the Electronic Explorer. To use the instrument, you will have to set up a reference circuit. However, if you are using the Analog Discovery (Legacy) or Analog Discovery 2, you can instead take advantage of the Transistor Tester Adapter to create this circuit.
  
 <columns 100% 75%> <columns 100% 75%>
Line 163: Line 163:
 === XYZ 3D Points / Surface === === XYZ 3D Points / Surface ===
  
-The XYZ 3D view allows you to plot a 3D scatter graph.  ** NOTE ** This feature is only available in the 64-bit versions of the Windows or macOS operating systems. Source trace, channels for the X, Y, and Z axis can be selected from the menu along the top side of the plot.  The Auto Scale feature is on by default which will adjust the scales on new capture, source, or channel changes.  The scale for each axis can be adjust manually in the dropdown and on the sides of the view.  +The XYZ 3D view allows you to plot a 3D scatter graph. Note that this feature is only available in the 64-bit versions of the Windows or macOS operating systems. Source trace, channels for the X, Y, and Z axes can be selected from the menu along the top side of the plot.  The Auto Scale feature is on by default which will adjust the scales on new capture, source, or channel changes.  The scale for each axis can be adjusted manually in the dropdown and on the sides of the view.  
  
 The ** gear ** dropdown menu contains the following options: The ** gear ** dropdown menu contains the following options: