Differences

This shows you the differences between two versions of the page.

Link to this comparison view

test-and-measurement:digital-discovery:controlling-digital-discovery-with-labview:start [2021/10/13 21:06] – external edit 127.0.0.1test-and-measurement:digital-discovery:controlling-digital-discovery-with-labview:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 11: Line 11:
   * [[https://store.arduino.cc/arduino-uno-rev3|Arduino UNO]]   * [[https://store.arduino.cc/arduino-uno-rev3|Arduino UNO]]
   * Jumper wires   * Jumper wires
-  * [[https://store.digilentinc.com/pmod-tmp3-digital-temperature-sensor/|Pmod TMP3]] - required for the //Spying on I2C Communication// example+  * [[https://digilent.com/shop/pmod-tmp3-digital-temperature-sensor/|Pmod TMP3]] - required for the //Spying on I2C Communication// example
   * [[https://https://store.arduino.cc/arduino-pro-mini|Arduino Pro Mini]] with 8MHz ATmega328P, or other 3V3 microcontroller (LilyPad, Arduino Fio, etc.) - required for the //Programming an AVR Microcontroller// example   * [[https://https://store.arduino.cc/arduino-pro-mini|Arduino Pro Mini]] with 8MHz ATmega328P, or other 3V3 microcontroller (LilyPad, Arduino Fio, etc.) - required for the //Programming an AVR Microcontroller// example
-  * [[https://store.digilentinc.com/pmod-lvlshft-logic-level-shifter/|Pmod LVLSHFT]] - required for the //Programming an AVR Microcontroller// example if a 5V microcontroller (like Arduino UNO) is used +  * [[https://digilent.com/shop/pmod-lvlshft-logic-level-shifter/|Pmod LVLSHFT]] - required for the //Programming an AVR Microcontroller// example if a 5V microcontroller (like Arduino UNO) is used 
-  * [[https://store.digilentinc.com/pmod-usbuart-usb-to-uart-interface/|Pmod USBUART]] - required for the //Using Different Logic Voltages// example +  * [[https://digilent.com/shop/pmod-usbuart-usb-to-uart-interface/|Pmod USBUART]] - required for the //Using Different Logic Voltages// example 
-  * [[https://store.digilentinc.com/pmod-da1-four-8-bit-d-a-outputs/|Pmod DA1]] - required for the //Using Different Logic Voltages// example+  * [[https://digilent.com/shop/pmod-da1-four-8-bit-d-a-outputs/|Pmod DA1]] - required for the //Using Different Logic Voltages// example
   * red LED - required for the //Using Different Logic Voltages// example   * red LED - required for the //Using Different Logic Voltages// example
   * 10KΩ resistor (brown-black-orange-gold) - required for the //Using Different Logic Voltages// example   * 10KΩ resistor (brown-black-orange-gold) - required for the //Using Different Logic Voltages// example