Differences

This shows you the differences between two versions of the page.

--- test-and-measurement:analog-discovery-studio:canvases:interposer-canvas:reference-manual [2021/06/02 13:21] – [Power Supplies Breadboard] Arthur Brown
+++ test-and-measurement:analog-discovery-studio:canvases:interposer-canvas:reference-manual [2022/10/04 04:38] (current) – external edit 127.0.0.1
@@ Line 36: / Line 36: @@
 Alternatively, the FPGA board can be powered externally through the barrel jack of whichever board is used. Important: When using an external power supply, to ensure that no damage to either device occurs, make sure to connect the Analog Discovery Studio's power supply before connecting the power supply to the FPGA board.
-"FIXME (option 1, 2, or 3, will be chosen pending further testing) Important: (1.) When using an external power supply, to ensure that no damage to either device occurs, make sure to connect the Analog Discovery Studio's power supply before connecting the power supply to the FPGA board. (2.) Do NOT use an external power supply with your FPGA board while it is connected to the Interposer Canvas, in order to prevent damage that may occur to the devices. (3.) We cut this whole 'important' bit since everything is safe and nothing will break."
 -----