Differences

This shows you the differences between two versions of the page.

--- test-and-measurement:analog-discovery-studio:canvases:interposer-canvas:getting-started [2021/06/02 20:38] – [Next Steps] Arthur Brown
+++ test-and-measurement:analog-discovery-studio:canvases:interposer-canvas:getting-started [2022/10/04 11:38] (current) – external edit 127.0.0.1
@@ Line 105: / Line 105: @@
 <WRAP column half>
 == 2.1 ==
-Each compatible FPGA board comes with an "Out-of-Box" demo programmed into nonvolatile memory, which can be used to show everything is working correctly.  Ensure that the programming mode jumper for the board is set to QSPI (or in the case of the Arty A7, just that the jumper is installed) and power the board on. The demo will boot, and you will see several LEDs light up. The behavior of the Out-of-Box demo differs depending on the board. Review the board's documentation for more information on the demo itself.
+Each compatible FPGA board comes with an "Out-of-Box" demo programmed into nonvolatile memory, which can be used to show everything is working correctly.  To run this demo, ensure that the programming mode jumper for the board is set to QSPI (or in the case of the Arty A7, just that the jumper is installed) and power the board on. The board will boot, and you will see several LEDs light up. The behavior of the Out-of-Box demo differs depending on the board, so make sure to review the board's documentation for more information on what it does.
 </WRAP>