Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
test-and-measurement:analog-discovery-studio:canvases:analog-discovery-canvas:user-guide [2022/09/12 15:41] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.comtest-and-measurement:analog-discovery-studio:canvases:analog-discovery-canvas:user-guide [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +===== Analog Discovery Canvas - Working with a an Analog Discovery 2 =====
 +
 +{{:reference:test-and-measurement:analog-discovery-studio:canvases:analog-discovery-canvas:adcwad2.jpg?600|}}
 +
 +==== Introduction ====
 +
 +This guide explains the use of the Analog Discovery Canvas with an Analog Discovery 2. Connect the Analog Discovery Canvas with the Analog Discovery 2 via the 2x15 header.  
 +
 +  * Two 630 tie-point solderless breadboards
 +  * 24 tie-point solderless breadboard for Analog Discovery I/O connections
 +  * Two 24 tie-point solderless breadboard for Shared Digital I/O connections
 +  * 24 tie-point solderless breadboard for Analog Discovery Studio output connections
 +  * 2x15 connector to make a connection with an Analog Discovery
 +  * Breakout solderless breadboard for Oscilloscope 1 & 2, Wave Gen 1 & 2, V+ and V-
 +  
 +**Note** The power supply switches, and power supply indicators are not functional when working with an Analog Discovery Studio.  The switches and indicators only work with the [[https://digilent.com/shop/analog-discovery-studio-a-portable-circuits-laboratory-for-every-student/|Analog Discovery Studio]].
 +
 +----
 +==== Inventory ====
 + 
 +
 +  * An [[/test-and-measurement/analog-discovery-2/start|Analog Discovery 2]]
 +  * An [[/test-and-measurement/analog-discovery-studio/canvases/analog-discovery-canvas/start|Analog Discovery Canvas]]
 +
 +**Note:** //This guide only pertains to the Analog Discovery 2. //
 +
 +----
 +
 +
 +==== Demonstration ====
 +
 +==== 1. Setup ====
 +<WRAP group>
 +<WRAP column half>
 +== 1.1 ==
 +
 +With the Analog Discovery 2 disconnected from your computer and the (optional) power supply turned off, connect it to the Analog Discovery Canvas via the 2x15 header found in the upper left hand corner of the Analog Discovery Canvas.
 +
 +</WRAP>
 +<WRAP column half>
 +
 +{{:reference:test-and-measurement:analog-discovery-studio:canvases:analog-discovery-canvas:adc2connector.jpg?400|}}
 +
 +</WRAP>
 +</WRAP>
 +----
 +
 +<WRAP group>
 +<WRAP column half>
 +== 1.2 ==
 +
 +Connect the Analog Discovery 2 to your computer via the USB cable and plug in the (optional) power supply.
 +
 +</WRAP>
 +<WRAP column half>
 +
 +</WRAP>
 +</WRAP>
 +----
 +
 +==== Next Steps ====
 +
 +For more guides on how to use the Analog Discovery Studio, return to the device's [[test-and-measurement:analog-discovery-studio:start|Resource Center]].
 +
 +For more information on WaveForms, visit the [[software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]. 
 +
 +For technical support, please visit the [[https://forum.digilentinc.com/forum/8-test-and-measurement/|Test and Measurement]] section of the Digilent Forums.
 +
 +{{tag>analog-discovery-studio tutorial analog-discovery-canvas-adc canvas}}