Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
test-and-measurement:analog-discovery-pro-5250:specifications [2022/02/18 00:00] – Revise formatting; tables, units, table of contents heading structure, move power supply DC accuracy table Arthur Browntest-and-measurement:analog-discovery-pro-5250:specifications [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 6: Line 6:
 ==== Analog Input Channels ==== ==== Analog Input Channels ====
  
-Supports the Oscilloscope, Spectrum Analyzer, Network Analyzer, Impedance Analyzer, and Script Editor instruments.+Supports the Oscilloscope, Data Logger, Spectrum Analyzer, Network Analyzer, Impedance Analyzer, and Script Editor instruments.
  
 === Vertical System === === Vertical System ===
Line 17: Line 17:
 ^ Input Coupling | AC, DC || ^ Input Coupling | AC, DC ||
 ^ Vertical Sensitivity (range) | 10 mV / div (100 mV peak to peak) \\ 20 mV / div (200 mV peak to peak) \\ 50 mV / div (400 mV peak to peak) \\ 100 mV / div (1 V peak to peak) \\ 200 mV / div (2 V peak to peak) \\ 500 mV / div (4 V peak to peak) \\ 1 V / div (10 V peak to peak) \\ 2 V / div (20 V peak to peak) \\ 5 V / div (40 V peak to peak)|| ^ Vertical Sensitivity (range) | 10 mV / div (100 mV peak to peak) \\ 20 mV / div (200 mV peak to peak) \\ 50 mV / div (400 mV peak to peak) \\ 100 mV / div (1 V peak to peak) \\ 200 mV / div (2 V peak to peak) \\ 500 mV / div (4 V peak to peak) \\ 1 V / div (10 V peak to peak) \\ 2 V / div (20 V peak to peak) \\ 5 V / div (40 V peak to peak)||
-^ Input Impedance | 1 MΩ \\ 20 pF ||+^ Input Impedance | 1 MΩ ││ 20 pF ||
 ^ Acquisition Modes | Sample, peak detect, averaging || ^ Acquisition Modes | Sample, peak detect, averaging ||
 ^ DC Offset Range | 10 mV/div, 20 mV/div, 50 mV/div ranges: ±5 V \\ 100 mV/div, 200 mV/div, 50 mV/div, 1 V/div, 2 V/div, 5 V/div ranges: ±20 V || ^ DC Offset Range | 10 mV/div, 20 mV/div, 50 mV/div ranges: ±5 V \\ 100 mV/div, 200 mV/div, 50 mV/div, 1 V/div, 2 V/div, 5 V/div ranges: ±20 V ||
Line 25: Line 25:
  
 |<100% 25%>| |<100% 25%>|
-^ Maximum Sampling Rate | 1 GS/s single channel, 500 MS/s per channel, dual channel ||+^ Maximum Sampling Rate | 1 GS/s single channel \\ 500 MS/s per channel, dual channel ||
 ^ Maximum Record Length | 1 MS per channel || ^ Maximum Record Length | 1 MS per channel ||
  
 ---- ----
 ==== Digital Channels / Logic Analyzer ==== ==== Digital Channels / Logic Analyzer ====
 +Supports the Logic Analyzer and Script Editor instruments.
  
 {{ :test-and-measurement:analog-discovery-pro-5250:connector.png?400 |}} {{ :test-and-measurement:analog-discovery-pro-5250:connector.png?400 |}}
Line 35: Line 36:
 === Vertical System === === Vertical System ===
 |<100% 40%>| |<100% 40%>|
-^ Number of Channels | 34 ||+^ Number of Channels | 34 [(At time of writing, WaveForms software does not support use of the CLK0/CLK1 lines. All 32 DIO pins are fully supported.)] ||
 ^ Maximum Input Frequency | 100 MHz || ^ Maximum Input Frequency | 100 MHz ||
 ^ Input Voltage | 0 V to 5 V || ^ Input Voltage | 0 V to 5 V ||
Line 45: Line 46:
  
 **Note:** Mixed signal oscilloscope digital channels are designed to withstand accidental overvoltage from signals on the ADP5250. They are not recommended for use with signals likely to exceed 0 V to 5 V in normal operation. **Note:** Mixed signal oscilloscope digital channels are designed to withstand accidental overvoltage from signals on the ADP5250. They are not recommended for use with signals likely to exceed 0 V to 5 V in normal operation.
 +
 +~~REFNOTES~~
  
 === Horizontal System === === Horizontal System ===
Line 70: Line 73:
  
 ===== Waveform Generator (WaveGen) ===== ===== Waveform Generator (WaveGen) =====
 +Supports the Waveform Generator, Network Analyzer, Impedance Analyzer, and Script Editor instruments.
 +
 |<100% 25% 25%>| |<100% 25% 25%>|
 ^ Waveforms                                              || Sine, square, ramp / triangle, DC, arbitrary     | ^ Waveforms                                              || Sine, square, ramp / triangle, DC, arbitrary     |
Line 76: Line 81:
 ^ Number of Channels                                     || 1                                                | ^ Number of Channels                                     || 1                                                |
 ^ Output Impedance                                       || 50 Ω                                             | ^ Output Impedance                                       || 50 Ω                                             |
 +^ Switchable Filter                                      || 36 MHz lowpass, 7-pole, elliptical               |
 ^ Sine    ^ Maximum Frequency                             | 20 MHz                                           | ^ Sine    ^ Maximum Frequency                             | 20 MHz                                           |
 ^ :::     ^ Total Harmonic Distortion (1 MHz)             | -55 dBc                                          | ^ :::     ^ Total Harmonic Distortion (1 MHz)             | -55 dBc                                          |
Line 87: Line 93:
 ^ Ramp / Triangle Maximum Frequency                      || 1 MHz                                            | ^ Ramp / Triangle Maximum Frequency                      || 1 MHz                                            |
 ^ Accuracy (with >10 kΩ load)  ^ Amplitude (1 kHz sine)   | ±(1% of output value ±5 mV)                      | ^ Accuracy (with >10 kΩ load)  ^ Amplitude (1 kHz sine)   | ±(1% of output value ±5 mV)                      |
-^ :::                          ^ DC                       | ±(1% of output value ±5 mV)                      |+^ :::                          ^ DC                       | ±(1% of output value ±7.5 mV)                    |
 ^ Output Range                 ^ 50 Ω                     | ±6 V                                             | ^ Output Range                 ^ 50 Ω                     | ±6 V                                             |
 ^ :::                          ^ Hi-Z (>10 kΩ)            | ±12 V                                            | ^ :::                          ^ Hi-Z (>10 kΩ)            | ±12 V                                            |
Line 105: Line 111:
  
 ===== Digital I/O ===== ===== Digital I/O =====
 +Supports the Static I/O and Script Editor instruments.
 +
 |<100% 40%>| |<100% 40%>|
 ^ Number of Channels | 8 || ^ Number of Channels | 8 ||
Line 239: Line 247:
 ^ DC Output | Voltage | 0 V to +6 V | 0 V to +25 V | 0 V to -25 V || ^ DC Output | Voltage | 0 V to +6 V | 0 V to +25 V | 0 V to -25 V ||
 ^ :::       | Current | 1 A | 500 mA | 500 mA || ^ :::       | Current | 1 A | 500 mA | 500 mA ||
-^ Programming Accuracy, ±(% of reading + offset) | Voltage | 0.1% + 5 mV | 0.1% + 20 mV | 0.1% + 20 mV ||+^ Programming Accuracy, ±(% of reading + offset) | Voltage | 0.1% + 5 mV | 0.15% + 20 mV | 0.15% + 20 mV ||
 ^ :::                                            | Current | 0.2% + 10 mA | 0.15% + 4 mA | 0.15 + 4 mA || ^ :::                                            | Current | 0.2% + 10 mA | 0.15% + 4 mA | 0.15 + 4 mA ||
-^ Readback Accuracy, ±(% of reading + offset) | Voltage | 0.1% + 5 mV | 0.1% + 20 mV | 0.1% + 20 mV || +^ Readback Accuracy, ±(% of reading + offset) | Voltage | 0.1% + 5 mV | 0.15% + 20 mV | 0.15% + 20 mV || 
-^ :::                                         | Current | 0.2% + 10 mA | 0.15% + 4 mA | 0.15 + 4 mA ||+^ :::                                         | Current | 0.2% + 10 mA | 0.15% + 4 mA | 0.15% + 4 mA ||
 ^ Programming Resolution | Voltage | 1.7 mV | 6.5 mV | 6.5 mV || ^ Programming Resolution | Voltage | 1.7 mV | 6.5 mV | 6.5 mV ||
 ^ :::                    | Current | 0.30 mA | 0.15 mA | 0.15 mA || ^ :::                    | Current | 0.30 mA | 0.15 mA | 0.15 mA ||
Line 314: Line 322:
 ---- ----
 ===== Power Requirements ===== ===== Power Requirements =====
-|<100% 25%> +|<100% 25%>| 
-  +^ Voltage Input Range | 100 V AC to 240 V AC, ±10%, 50/60 Hz ||
-^ Voltage Input Range | 100 V AC to 240 V AC, 50/60 Hz ||+
 ^ Power Consumption | 100 W maximum || ^ Power Consumption | 100 W maximum ||
 ^ Power Input Connector | IEC C13 power connector ||  ^ Power Input Connector | IEC C13 power connector || 
Line 339: Line 346:
  
 ==== DMM Isolation Voltages (Ground to Earth) ==== ==== DMM Isolation Voltages (Ground to Earth) ====
 +
 +<columns 100% 5% 95%>
 +{{:test-and-measurement:analog-discovery-pro-5250:hazard.png?40}}
 +<newcolumn>
 +**Hazardous Voltage:** This icon denotes a warning advising you to take precautions to avoid electrical shock.
 +</columns>
 +
 +=== Channel-to-earth Ground ===
 |<100% 25%>| |<100% 25%>|
 ^ Continuous | 300 V, Measurement Category II || ^ Continuous | 300 V, Measurement Category II ||
Line 346: Line 361:
  
 Measurement Category II is for measurements performed on circuits directly connected to the electrical distribution system. This category refers to local-level electrical distribution, such as that provided by a standard wall outlet, for example, 115 V for U.S. or 230 V for Europe. Measurement Category II is for measurements performed on circuits directly connected to the electrical distribution system. This category refers to local-level electrical distribution, such as that provided by a standard wall outlet, for example, 115 V for U.S. or 230 V for Europe.
 +
 +<columns 100% 5% 95%>
 +{{:test-and-measurement:analog-discovery-pro-5250:caution.png?40}}
 +<newcolumn>
 +**Caution:** Do not connect the ADP5250 hardware to signals or use for measurements within Measurement Categories III or IV.
 +</columns>
  
 ==== DC Power Supply Isolation Voltages ==== ==== DC Power Supply Isolation Voltages ====
 |<100% 25%>| |<100% 25%>|
-^ +25V and -25V to earth ground, continuous | 60VDC, Measurement Category 1 |||+^ +25V and -25V to earth ground, continuous | 60 VDC, Measurement Category 1 ||| 
 + 
 +**Note:** //Measurement Categories CAT I and CAT O (Other) are equivalent. The input circuits are not intended for direct connection to the MAINs building installations of Categories CAT II, CAT III, or CAT IV.//
  
 ---- ----
Line 373: Line 396:
  
 ---- ----
- +{{page>test-and-measurement:analog-discovery-pro-5250:certifications&fullpage&noindent}}
-==== Safety ==== +
-This product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use:  +
-  * IEC 61010-1, EN 61010-1  +
-  * UL 61010-1, CSA 61010-1  +
- +
----- +
- +
-==== Electromagnetic Compatibility ==== +
- +
-This product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use; for radio equipment; and for telecommunication terminal equipment:  +
-  * EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity   +
-  * EN 55011 (CISPR 11): Group 1, Class A emissions  +
-  * EN 55022 (CISPR 22): Class A emissions  +
-  * EN 55024 (CISPR 24): Immunity  +
-  * AS/NZS CISPR 11: Group 1, Class A emissions  +
-  * AS/NZS CISPR 22: Class A emissions  +
-  * FCC 47 CFR Part 15B: Class A emissions  +
-  * ICES-001: Class A emissions  +
- +
-**Note:** In the United States (per FCC 47 CFR), Class A equipment is intended for use in commercial, light-industrial, and heavy-industrial locations. In Europe, Canada, Australia, and New Zealand (per CISPR 11) Class A equipment is intended for use only in heavy-industrial locations.  +
- +
-**Note:** Group 1 equipment (per CISPR 11) is any industrial, scientific, or medical equipment that does not intentionally generate radio frequency energy for the treatment of material or inspection/analysis purposes.  +
- +
-**Note:** For EMC declarations and certifications, and additional +
- +
- +
----- +
- +
-====CE Compliance==== +
-This product meets the essential requirements of applicable European Directives, as follows:  +
-  * 2014/35/EU; Low-Voltage Directive (safety)  +
-  * 2014/30/EU; Electromagnetic Compatibility Directive (EMC)  +