Differences

This shows you the differences between two versions of the page.

Link to this comparison view

test-and-measurement:analog-discovery-pro-3x50:getting-started-guide [2021/05/14 23:08] – ↷ Links adapted because of a move operation Arthur Browntest-and-measurement:analog-discovery-pro-3x50:getting-started-guide [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 2: Line 2:
 ~~TechArticle~~ ~~TechArticle~~
 {{ reference:test-and-measurement:analog-discovery-pro-3x50:getting-started-success.png?600 |}} {{ reference:test-and-measurement:analog-discovery-pro-3x50:getting-started-success.png?600 |}}
 +
 ===== Overview ===== ===== Overview =====
 This guide will get you started with your new Analog Discovery Pro, from getting it out of the box to taking your first measurement in the default Standard mode.  This guide will get you started with your new Analog Discovery Pro, from getting it out of the box to taking your first measurement in the default Standard mode. 
Line 251: Line 252:
 Take a BNC oscilloscope probe and connect it to the Analog Discovery Pro’s Oscilloscope Channel 1. Connect a BNC to minigrabber clip cable to Wavegen Out Channel 1. Connect the tips together. Set the scope probe's attenuation to 1x. Take a BNC oscilloscope probe and connect it to the Analog Discovery Pro’s Oscilloscope Channel 1. Connect a BNC to minigrabber clip cable to Wavegen Out Channel 1. Connect the tips together. Set the scope probe's attenuation to 1x.
 </WRAP><WRAP column half> </WRAP><WRAP column half>
-{{ https://reference.digilentinc.com/_media/reference/instrumentation/guides/wavegen_and_scope.jpg?600 |}}+{{ reference/test-and-measurement/guides/wavegen_and_scope.jpg?600 |}}
 </WRAP></WRAP> </WRAP></WRAP>
 ---- ----