Differences

This shows you the differences between two versions of the page.

Link to this comparison view

test-and-measurement:analog-discovery-2:start [2022/04/28 21:54] – updated hackster project url so it doesn't 404 error James Colvintest-and-measurement:analog-discovery-2:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 + 
 +~~NOTOC~~ 
 +    
 +====== Analog Discovery 2 ======
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/analog-discovery-2-100ms-s-usb-oscilloscope-logic-analyzer-and-variable-power-supply/
 +| Getting Started = getting-started-guide
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/8-test-and-measurement/
 +| Title = Analog Discovery 2
 +| Subtitle = 14-bit 100MS/s USB Oscilloscope, Logic Analyzer, and Variable Power Supply
  
 +| Header = Software
 +| WaveForms = [[software/waveforms/waveforms-3/start|WaveForms]]
 +
 +| Header = Oscilloscope
 +| Channels = 2
 +| Resolution = 14-bit
 +| Sample Rate = 100 MS/s
 +| Bandwidth = 10 MHz+
 +| Input Impedance = 1 MΩ
 +| Voltage Range = ±25V
 +| Max Buffer Size = 16384 Samples/channel
 +
 +| Header = Arbitrary Waveform Generator
 +| Channels = 2
 +| Resolution = 14-bit
 +| Sample Rate = 100 MS/s
 +| Bandwidth = 12 MHz+
 +| Input Impedance = 1 MΩ
 +| Voltage Range = ±5V
 +| Max Buffer Size = 16384 Samples/channel
 +| Additional Output Port/s = Stereo Audio Output Jack
 +
 +| Header = Programmable Power Supply
 +| Channels = 2
 +| Output Voltage = 0.5V to 5V or -0.5V to -5V
 +| Maximum Power (USB) = 500mW total
 +| Maximum Power (External Supply) = 2.1W per channel
 +| Maximum Current = 700mA per channel when using external power
 +
 +| Header = Voltmeter
 +| Channels = 2 (Shared with Oscilloscope)
 +| DC = ±25V
 +| AC = ±25V
 +
 +| Header = Data Logger
 +| Channels = 2 (Shared with Oscilloscope)
 +| Supported Measurements = DC, True RMS, AC RMS, Custom
 +
 +| Header = Logic Analyzer
 +| Channels = 16
 +| Logic Level = 3.3V/1.2V CMOS, 5V Tolerant
 +| Sample Rate = 100 MS/s
 +| Max Buffer Size = 16384 Samples/channel
 +
 +| Header = Pattern Generator
 +| Channels = 16 (Shared with Logic Analyzer)
 +| Logic Level = 3.3V CMOS
 +| Sample Rate = 100 MS/s
 +| Max Buffer Size = 16384 Samples/channel
 +
 +| Header = Static I/O
 +| Channels = 16 (Shared with Logic Analyzer)
 +| Virtual Devices = LEDs, Buttons, Switches, Sliders, Progress Bars, Seven Segment Displays
 +
 +| Header = Spectrum Analyzer
 +| Channels = 2 (Shared with Oscilloscope)
 +| Frequency Range = 0Hz to 50MHz
 +| Reference Circuit = Various
 +
 +| Header = Network Analyzer
 +| Inputs / Outputs = Shared with Oscilloscope and Waveform Generator
 +| Frequency Sweep Range = 1mHz to 10/25MHz
 +| Frequency Steps = 1 to 1000
 +
 +| Header = Impedance Analyzer
 +| Inputs / Outputs = Shared with Oscilloscope and Waveform Generator
 +| Frequency Sweep Range = 100uHz to 25MHz
 +| Frequency Steps = 1 to 10000
 +| Plots = Impedance, Admittance, Inductance, Capacitance, etc.
 +
 +| Header = Protocol Analyzer
 +| Channels = 16 (Shared with Logic Analyzer)
 +| Supported Protocols = UART, SPI, I2C, CAN
 +
 +| Header = Script Editor
 +| Supported Instruments = All
 +| Language = JavaScript
 +
 +| Header = Bidirectional External Triggers
 +| Channels = 2
 +| Supported Instruments = Scope, Wavegen, Logic, Patterns, Spectrum, Scripts
 +
 +| Header = Pinout
 +| Full Row = {{ :analog_discovery_2:analogdiscovery2-pinout-600.png?nolink&450 |Analog Discovery 2 Pinout.}}
 +
 +| Header = Product Compliance
 +| HTC = 8471809000
 +| ECCN = 3A992.a
 +
 +}}
 +
 +{{page>test-and-measurement:analog-discovery-2:reference-manual}} \\ \\
 +
 +===== Getting Started =====
 +  * [[getting-started-guide|Getting Started Guide]]
 +
 +----
 +===== Documentation =====
 +  * [[reference-manual|Reference Manual]]
 +  * [[hardware-design-guide|Hardware Design Guide]]
 +  * [[specifications|Specifications]]
 +  * [[faq|Frequently Asked Questions]]
 +
 +  * [[software:waveforms:waveforms-3:reference-manual|WaveForms Reference Manual]]
 +
 +----
 +===== Tutorials =====
 +/*Most tutorials in this list are shared with the Analog Discovery Studio and Analog Discovery Legacy, and are embedded from a section of test-and-measurement/guides/start*/
 +
 +{{section>test-and-measurement:guides:start#analog_discovery_tutorials}}
 +  * [[test-and-measurement:analog-discovery-2:demos:measuring-current]]
 +  * [[test-and-measurement:analog-discovery-2:demos:measuring-harmonics]]
 +
 +----
 +===== Third Party Software Support =====
 +  * [[https://www.mathworks.com/hardware-support/digilent-analog-discovery.html|MATLAB Support]]
 +  * [[test-and-measurement:guides:getting-started-with-labview]]
 +  * [[software:waveforms:waveforms-sdk:thingspeak]]
 +
 +/* Original Labview Support: https://forums.ni.com/t5/Analog-Discovery-Student/Getting-Started-with-LabVIEW-and-Analog-Discovery-2-NI-Edition/ta-p/3553508?profile.language=en */
 +
 +----
 +===== Accessories =====
 +=== Breadboard Adapter ===
 +The Breadboard Adapter, featuring a small breadboard that connects to the Analog Discovery 2, is a way to easily set up and demonstrate portable circuits. \\ For more information, see the [[test-and-measurement:bb-adapter-board:start|Breadboard Adapter's Resource Center]].
 +
 +=== Breadboard Breakout ===
 +The Breadboard Breakout allows the pins of the Analog Discovery 2 to be directly connected to a breadboard. \\ For more information, see the [[test-and-measurement:analog-discovery-2-breadboard-breakout:start|Breadboard Breakout's Resource Center]].
 +
 +=== BNC Adapter ===
 +The BNC Adapter allows standard BNC-terminated test leads and probes to be used with the Analog Discovery 2. \\ For more information, see the [[test-and-measurement:bnc-adapter-board:start|BNC Adapter's Resource Center]].
 +
 +=== Impedance Analyzer ===
 +The Impedance Analyzer Adapter for the Analog Discovery 2 makes WaveForms' Impedance Analyzer instrument easier to use by providing the reference resistors and relays required for the instrument's use. The appropriate reference circuit for the job is automatically selected. \\ For more information, see the [[add-ons:impedance-analyzer:start|Impedance Analyzer's Resource Center]].
 +
 +=== Audio Adapter ===
 +The Audio Adapter, using the WaveForms' Oscilloscope instrument, provides the feature to analyze audio signals from external sources. It has one Mono and one Mono/Stereo 3.5mm Audio Jack connector to facilitate the interface with external audio generators.  \\ For more information, see the [[add-ons:audio-adapter:start|Audio Adapter's Resouce Center]].
 +
 +----
 +/*
 +===== Example Projects =====
 +----
 +*/
 +===== Highlighted Community Projects =====
 +  * [[https://www.youtube.com/watch?v=dFj_fa78y7chttp://example.com|Analog Discovery 2 Audio Testbench (YouTube)]]
 +  * [[http://www.instructables.com/id/Using-the-Analog-Discovery-to-Debug-Digital-Logic/| Using the Analog Discovery to Debug Digital Logic]]
 +  * [[test-and-measurement:analog-discovery-2:demos:labview-adding-knobs]]
 +  * [[http://www.instructables.com/id/Analog-Discovery-2-USB-Oscilloscope-LabVIEW/| Analog Discovery 2 USB Oscilloscope + LabVIEW]]
 +  * [[http://www.instructables.com/id/DIY-ECG-Using-a-Analog-Discovery-2-and-LabVIEW/| DIY ECG using a Analog Discovery 2 and LabVIEW]]
 +  * [[http://www.instructables.com/id/Controlling-the-Analog-Discovery-Waveform-Generato/| Controlling the Analog Discovery™ Waveform Generator in LabVIEW]]
 +  * [[http://www.instructables.com/id/Analog-Discovery-PWM-and-Digital-IO-Control-though/| Analog Discovery PWM and Digital IO Control though LabVIEW]]
 +
 +----
 +
 +===== Featured Projects =====
 +  * [[add-ons/impedance-analyzer/diy-speaker]]
 +  * [[test-and-measurement:guides:manchester-encoding]]
 +  * [[test-and-measurement:analog-discovery-2:jupyter]]
 +  * [[test-and-measurement:analog-discovery-2:ad2-motor-debugger:start]]
 +  * [[test-and-measurement:analog-discovery-2:pmod-mic3]]
 +  * [[test-and-measurement:analog-discovery-2:transistor-iv-curve-tracer]]
 +  * [[test-and-measurement:analog-discovery-2:pmod-jstk]]
 +  * [[test-and-measurement:analog-discovery-2:am-signal-demodulation-and-playback]]
 +  * [[test-and-measurement:analog-discovery-2:rc-low-pass]]
 +
 +----
 +
 +===== Hackster Projects =====
 +A complete list of Hackster projects featuring the Analog Discovery 2 can be found on [[https://projects.digilentinc.com/projects?part_id=30714&sort=trending|projects.digilentinc.com]]
 +
 +----
 +===== Academic Resources =====
 +  * [[learn/courses/real-analog/start]]
 +  * [[https://www.elsevier.com/books/electronics-explained/unknown/978-0-12-811641-8|Electronics Explained Textbook]]
 +  * [[https://education.ni.com/teach/resources/74/complementary-labs-for-electrical-engineering|Complementary Labs for Electrical Engineering - National Instruments]]
 +
 +----
 +===== Additional Resources =====
 +  * {{https://s3-us-west-2.amazonaws.com/digilent/resources/instrumentation/analog-discovery-2/AD2-flywire-labels-printable.pdf | Flywire Labels Sticker Sheet}}
 +  * {{reference:test-and-measurement:analog-discovery-2:ad2_pcb1_3dmodel.zip|3D STP File}}
 +  * {{https://s3-us-west-2.amazonaws.com/digilent/resources/instrumentation/analog-discovery-2/analogdiscovery2.fzpz|Fritzing Part}}
 +  * {{reference:test-and-measurement:analog-discovery-2:adii_assmbly_2_2.zip|3D Model of the Analog Discovery 2 Case}}
 +  * [[https://digilent.com/shop/analog-discovery-2-student-bundle/|Student Bundle]]: {{ reference:test-and-measurement:analog-discovery-2:analog-parts-kit-contents.pdf | Analog Parts Kit Component List}}
 +  * {{ reference:test-and-measurement:analog-discovery-2:analog_discovery_2_statement_of_volatility.pdf |Analog Discovery 2 Statement of Volatility}}
 +
 +----
 +{{tag>resource-center}}