Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:zybo-z7:demos:xadc [2021/06/24 22:01] – Arthur Brownprogrammable-logic:zybo-z7:demos:xadc [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Zybo Z7 XADC Demo ====== ====== Zybo Z7 XADC Demo ======
- 
-<WRAP todo important> 
-== Under Construction == 
-</WRAP> 
  
 {{:learn:programmable-logic:tutorials:zybo-z7-xadc-demo:zybo-z7-xadc-hw.jpg?500|}} {{:learn:programmable-logic:tutorials:zybo-z7-xadc-demo:zybo-z7-xadc-hw.jpg?500|}}
Line 19: Line 15:
   * Zybo Z7 with a MicroUSB Programming Cable   * Zybo Z7 with a MicroUSB Programming Cable
   * Vivado installation compatible with the latest release of this demo (2020.1)   * Vivado installation compatible with the latest release of this demo (2020.1)
-    * //See [[programmable-logic:guides:installation|Installing Vivado, Vitis, and Digilent Board Files]] for installation instructions.//+    * //See [[programmable-logic:guides:installing-vivado-and-vitis|Installing Vivado, Vitis, and Digilent Board Files]] for installation instructions.//
   * A circuit to measure   * A circuit to measure
  
Line 32: Line 28:
  
 ^ Board Variant  ^ Release Tag  ^ Release Downloads  ^ Setup Instructions  | ^ Board Variant  ^ Release Tag  ^ Release Downloads  ^ Setup Instructions  |
-| Zybo Z7-20  | @#C0EEBD: XADC/20/2020.1-1  | [[https://github.com/Digilent/Zybo-Z7/releases/tag/XADC/20/2020.1-1|Release ZIP Downloads]]  | See //Using the Latest Release//, below  | +| Zybo Z7-20  | @#C0EEBD: 20/XADC/2020.1-1  | [[https://github.com/Digilent/Zybo-Z7/releases/tag/20/XADC/2020.1-1|Release ZIP Downloads]]  | See //Using the Latest Release//, below  | 
-| Zybo Z7-10  | @#C0EEBD: XADC/10/2020.1-1  | [[https://github.com/Digilent/Zybo-Z7/releases/tag/XADC/10/2020.1-1|Release ZIP Downloads]]  | See //Using the Latest Release//, below  |+| Zybo Z7-10  | @#C0EEBD: 10/XADC/2020.1-1  | [[https://github.com/Digilent/Zybo-Z7/releases/tag/10/XADC/2020.1-1|Release ZIP Downloads]]  | See //Using the Latest Release//, below  |
 | Zybo Z7-20  | v2018.2-1  | [[https://github.com/Digilent/Zybo-Z7-20-XADC/releases/tag/2018.2-1|Release ZIP Downloads]]  | [[https://github.com/Digilent/Zybo-Z7-20-XADC|v2018.2-1 Github README]]  | | Zybo Z7-20  | v2018.2-1  | [[https://github.com/Digilent/Zybo-Z7-20-XADC/releases/tag/2018.2-1|Release ZIP Downloads]]  | [[https://github.com/Digilent/Zybo-Z7-20-XADC|v2018.2-1 Github README]]  |
 | Zybo Z7-10  | v2018.2-1  | [[https://github.com/Digilent/Zybo-Z7-10-XADC/releases/tag/2018.2-1|Release ZIP Downloads]]  | [[https://github.com/Digilent/Zybo-Z7-10-XADC|v2018.2-1 Github README]]  | | Zybo Z7-10  | v2018.2-1  | [[https://github.com/Digilent/Zybo-Z7-10-XADC/releases/tag/2018.2-1|Release ZIP Downloads]]  | [[https://github.com/Digilent/Zybo-Z7-10-XADC|v2018.2-1 Github README]]  |
Line 39: Line 35:
 | Zybo Z7-10  | v2016.4-1  | [[https://github.com/Digilent/Zybo-Z7-10-XADC/releases/tag/v2016.4-1|Release ZIP Downloads]]  | [[learn:programmable-logic:tutorials:github-demos:start]]  | | Zybo Z7-10  | v2016.4-1  | [[https://github.com/Digilent/Zybo-Z7-10-XADC/releases/tag/v2016.4-1|Release ZIP Downloads]]  | [[learn:programmable-logic:tutorials:github-demos:start]]  |
  
-**Note for Advanced Users:** //All demos for the (Board) are provided through the [[https://github.com/Digilent/Board|(Board)]] repository on Github. Further documentation on the structure of this repository can be found on this wiki's [[programmable-logic:documents:git]] page.//+**Note for Advanced Users:** //All demos for the Zybo Z7 are provided through the [[https://github.com/Digilent/Zybo-Z7|Zybo-Z7]] repository on Github. Further documentation on the structure of this repository can be found on this wiki's [[programmable-logic:documents:git]] page.//
 ---- ----
 Instructions on the use of the latest release can be found in this dropdown: Instructions on the use of the latest release can be found in this dropdown:
Line 49: Line 45:
 {{page>programmable-logic:guides:using-github-releases#hardware_only_release_before_programming&noheader}} {{page>programmable-logic:guides:using-github-releases#hardware_only_release_before_programming&noheader}}
  
---> Set up the (Board) #+--> Set up the Zybo Z7 #
  
-FIXME+<columns 100% 50%> 
 +In order to use the demo, you will need to connect a circuit to the XADC Pmod Port in order to measure a voltage. The following example shows a voltage divider that produces each voltage between 0 V and 1 V in increments of 0.33 V. This circuit uses a chain of three 1 kΩ resistors in series with a 4.7 kΩ and a 2.2 kΩ resistor. The circuit is tied to the 3V3 and GND pins of the XADC Pmod header to provide power. Each of the 'n' pins, the lower row of the XADC port, are connected to ground. 
 +<newcolumn> 
 +{{:learn:programmable-logic:tutorials:zybo-z7-xadc-demo:zybo-z7-xadc-hw.jpg?400|}} 
 +</columns> 
 + 
 +<WRAP round important> 
 +===Important=== 
 +Voltages to be measured should be in the range of 0 to 1.0 Volts. 
 +</WRAP>
  
 ---- ----
Line 64: Line 69:
  
 ---- ----
-===== Additional Resources =====+===== XADC Channels =====
  
-All materials related to the use of the FIXME can be found on its [[FIXME link|Resource Center]].+Each analog input channel will control the brightness of an LED as shown in the following table: 
 + 
 +| Channel Name ^ LED # ^ Pmod Pin #s ^ 
 +^ AD14  | LD0  | 1 & 7  | 
 +^ AD7   | LD1  | 2 & 8  | 
 +^ AD15  | LD2  | 3 & 9  | 
 +^ AD6   | LD3  | 4 & 10  | 
 + 
 +Changing Voltages by reconfiguring the circuit while the demo is running is fine. If you built the example circuit shown in the "Using the Latest Release" section, above, feel free to move jumpers around to test out the different nodes of the voltage divider. 
 + 
 +===== Additional Resources =====
  
-All materials related to the use of the FIXME can be found on their resource centers, linked below: +All materials related to the use of the Zybo Z7 can be found on its [[..:start|Resource Center]].
-  * [[start|(product) Resource Center]] +
-  * [[start|(product) Resource Center]]+
  
 For a walkthrough of the process of creating a simple HDL project in Vivado, see [[programmable-logic:guides:getting-started-with-vivado]]. Information on important parts of the GUI, and indirect discussion of the steps required to modify, rebuild, and run this demo in hardware can also be found here. For a walkthrough of the process of creating a simple HDL project in Vivado, see [[programmable-logic:guides:getting-started-with-vivado]]. Information on important parts of the GUI, and indirect discussion of the steps required to modify, rebuild, and run this demo in hardware can also be found here.
Line 77: Line 90:
  
 ---- ----
-<code>{{tag>project zybo-z7}}</code>