Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:zedboard:start [2022/05/13 16:21] – [Tutorials] Arthur Brownprogrammable-logic:zedboard:start [2022/10/04 04:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +    
 +====== ZedBoard ======
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/zedboard-zynq-7000-arm-fpga-soc-development-board/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/4-fpga/
 +| Title = ZedBoard
 +| Subtitle = Zynq-7000 Development Board
 +| Header = Features
 +| Bullet = USB-JTAG Programming using Digilent SMT1-equivalent circuit
 +| Header = Key Specifications
 +| FPGA Part # = XC7Z020-CLG484
 +| Oscillators = 33.333MHz (PS), 100MHz (PL)
 +| Ethernet = 10/100/1G 
 +| Header = Connectivity and On-board I/O
 +| Pmod Connectors = 5 2x6
 +| HDMI = HDMI output
 +| VGA = 12-bit VGA
 +| Display = 128x32 OLED
 +| Audio = Line-in, line-out, headphone, mic
 +| USB = USB OTG 2.0
 +| SD = 4GB SD Card
 +| FMC = One LPC FMC
 +| AMS = One AMS Header
 +| Switches = 8 DIP/slide switches
 +| Push-buttons = 7
 +| Reset Buttons = 2
 +| User LEDs = 9
 +| DONE LED = 1
 +| Header = Electrical
 +| Power = on/off switch \\ 12V 5A AC/DC regulator
 +| Logic Level = 3.3V
 +| Header = Physical
 +| Width = 6.3 in
 +| Length = 6.3 in
 +}}
  
 +{{page>reference-manual}} \\ \\
 +
 +===== Documentation =====
 +{{topic>zedboard +doc -legacy}}
 +
 + /* Commenting out this schematic until we start selling Rev F boards. 
 +  * {{ :reference:programmable-logic:zedboard:zed_sch_rev_f1-public.pdf | Zedboard Schematic (Rev. F.1)}} 
 +  * */
 +  * {{ :reference:programmable-logic:zedboard:zed_sch_rev_f1-public.pdf | Zedboard Schematic (Rev. F.1)}}
 +  * {{ :reference:programmable-logic:zedboard:zedboard-schematic-rev-e1-public.pdf | Zedboard Schematic (Rev. E.1)}}
 +  * {{ :reference:programmable-logic:zedboard:zedboard_sch.pdf|Zedboard Schematic (Rev. D.2)}}
 +
 +---- 
 +===== Tutorials =====
 +
 +  * [[programmable-logic:guides:installing-vivado-and-vitis]]
 +    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
 +  * [[programmable-logic:guides:getting-started-with-ipi]]
 +    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
 +  * [[programmable-logic:guides:getting-started-with-vivado]]
 +    * Walks through using Vivado to create a simple design that blinks a single LED.
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
 +    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
 +    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.
 +
 +  * [[learn/programmable-logic/tutorials/zedboard-getting-started-with-zynq/start]]
 +  * [[learn/programmable-logic/tutorials/zedboard-creating-custom-ip-cores/start]]
 +  * [[learn/programmable-logic/tutorials/zedboard-programming-guide/start]]
 +
 +----
 +===== Example Projects =====
 +{{topic>zedboard +project -legacy}}
 +
 +----
 +===== Community Projects =====
 +{{Digilent Hackster
 +| product = "Zedboard"
 +}}  
 +
 +/*  * [[http://zedboard.org/projects/1521|Zedboard.org User Created Projects]] */
 +
 +----
 +===== Additional Resources =====
 +  * [[learn:programmable-logic:tutorials:zedboard-led-demo:start:|Zedboard LED Demo]]
 +  * {{:reference:programmable-logic:zedboard:fpga_package_pin_to_fmc.pdf|FPGA Package Pins to FMC}}
 +  * Out-Of-Box Demo {{:zedboard:zedboard_oob_design.zip|zip}}
 +    * This zip file contains out of box (OOB) SD card image and source. Documentation on how to obtain and build the Linux Kernel along with the hardware project and boot files are provided.
 +  * Zedboard_linux_Design {{ :reference:programmable-logic:zedboard:zedboard_linux_design.zip |}}
 +  * Zedboard_linux_Design_14_2 {{ :reference:programmable-logic:zedboard:zedboard_linux_design_14_2.zip |}}
 +  * Petalinux Documentation [[http://www.xilinx.com/products/design-tools/embedded-software/petalinux-sdk.html|Link]]
 +    * The Petalinux tools provide a quick solution for getting Linux running on the ZedBoard. Xilinx provides a BSP targeted to the ZedBoard from the Downloads section of their site.
 +  * {{:reference:programmable-logic:zedboard:zedboard_dimensions.zip| ZedBoard Mechanical Drawings}}
 +  * Additional technical documentation can be found through [[https://www.avnet.com/wps/portal/us/products/avnet-boards/avnet-board-families/zedboard/|Avnet's Zedboard page]]
 +
 +{{tag>programmable-logic programmable-logic-start zedboard resource-center}}