Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
programmable-logic:pynq-z1:start [2022/07/29 10:25] – Update for Rev F with Ethernet and Flash PCNs Arthur Brownprogrammable-logic:pynq-z1:start [2022/10/04 04:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +     
 +====== PYNQ-Z1 ======
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pynq-z1-python-productivity-for-zynq-7000-arm-fpga-soc/
 +| Manual = [[reference-manual]]
 +| Support = http://pynq.io
 +| Title = PYNQ-Z1 
 +| Subtitle = Python Productivity for Zynq
 +| Header = Features
 +| Bullet = Fully supported by the PYNQ framework 
 +| Bullet = 650MHz dual-core Cortex-A9 processor
 +| Bullet = 512 MB DDR3
 +| Bullet = Wide range of USB, Ethernet, Video and Audio connectivity
 +| Bullet = Arduino shield and Pmod connectors for adding-on hardware devices
 +| Bullet = Programmable from JTAG, Quad-SPI flash, and microSD card
 +| Header = Key FPGA Specifications
 +| Logic slices = 13,300 
 +| 6-input LUTs =  53,200
 +| Flip-Flops = 106,400
 +| Block RAM = 630 KB
 +| DSP Slices = 220
 +| Clock Resources = Zynq PLL with 4 outputs \\ 4 PLLs \\ 4 MMCMs \\ 125 MHz external clock
 +| Internal ADC = Dual-channel, 1 MSPS
 +| Header = Connectivity and On-board I/O
 +| USB = USB-UART \\ USB-JTAG Programmer \\ USB Host
 +| Ethernet = Gigabit Ethernet PHY
 +| HDMI = Sink (input) \\ Source (output)
 +| Microphone = Microphone with PDM interface
 +| Audio = PWM driven mono audio output \\ with 3.5mm jack
 +| Pmod Connectors = 2
 +| Other Connectors = Arduino/chipKIT shield connector
 +| Switches = 2 slide switches
 +| Buttons = 4 Push buttons 
 +| LEDs = 4 LEDs, 2 RGB LEDs
 +| Header = Electrical
 +| Power Inputs = USB \\ 7V-15V External source
 +| Header = Physical
 +| Width = 88 mm
 +| Length = 124 mm
 +| 3D model = {{ :reference:programmable-logic:pynq-z1:pynq-z1_3d.zip |Download}}
 +| 3D Case = {{ :reference:programmable-logic:pynq-z1:pynq_case_modified.zip |Download }}
 +| Header = Design Resources
 +| PYNQ Boot Image = [[https://files.digilent.com/Products/PYNQ/pynq_z1_v2.4.zip| PYNQ-Z1 Image]]
 +| Master XDC = {{ :reference:programmable-logic:pynq-z1:pynq-z1_c.zip |Download}}
 +| Zynq Presets = {{ :reference:programmable-logic:pynq-z1:pynq_revc.zip |Download}}
 +| Protective Acrylic case = {{ :reference:programmable-logic:pynq-z1:pynq_case.zip |Download}}
 +| Header = Documentation
 +| Zynq Datasheet = [[https://docs.xilinx.com/v/u/en-US/ds187-XC7Z010-XC7Z020-Data-Sheet | XC7Z020-1CLG400C]]
 +| Zynq Manual = [[https://docs.xilinx.com/v/u/en-US/ug585-Zynq-7000-TRM|Zynq TRM]]
 +| Schematic = {{:reference:programmable-logic:pynq-z1:pynq-z1_sch.pdf| Rev. C}}
 +| PYNQ Manual= [[http://pynq.readthedocs.io| pynq.readthedocs.io]]
 +| PYNQ Github = [[https://github.com/Xilinx/PYNQ| PYNQ Github]]
 +| Header = Product Compliance
 +| HTC = 8471500150
 +| ECCN = 5A992.c
 +}}
  
 +{{page>reference-manual}} \\ \\
 + 
 +===== Tutorials =====
 +{{topic>pynq-z1 +tutorial}}
 +All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
 +----
 +===== Example Projects =====
 +{{topic>pynq-z1 +project}}
 +All support and project tutorials for PYNQ are found at the project webpage at [[http://www.pynq.io/ |www.pynq.io]].
 +----
 +===== Additional Resources ===== 
 +  * [[https://www.xilinx.com/support/university/workshops.html|Xilinx Vivado Workshop materials]]
 +
 +----
 +
 +{{tag>programmable-logic programmable-logic-start pynq-z1 resource-center}}