Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:guides:getting-started-with-ipi [2022/03/08 22:40] – remove microblaze-mig callout Arthur Brownprogrammable-logic:guides:getting-started-with-ipi [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 14: Line 14:
   * Vivado and Vitis installations   * Vivado and Vitis installations
     * See [[programmable-logic:guides:installing-vivado-and-vitis]] for instructions on how to install these tools.     * See [[programmable-logic:guides:installing-vivado-and-vitis]] for instructions on how to install these tools.
 +    * You also need the board files for your board. This guide is intended for use with the board files available from Digilent's vivado-library repo on Github. You can get these files using the process described in the [[installing-vivado-and-vitis]] guide. These files will also be available through the Vivado application itself in versions 2022.1 and newer.
  
 **Note:** //If you are using a version of Vivado that includes Xilinx SDK (2019.1 or older), check out [[vivado/getting-started-with-ipi/2018.2]].// **Note:** //If you are using a version of Vivado that includes Xilinx SDK (2019.1 or older), check out [[vivado/getting-started-with-ipi/2018.2]].//