Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:guides:getting-started-with-ipi [2021/11/13 01:30] – [Inventory] Arthur Brownprogrammable-logic:guides:getting-started-with-ipi [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 14: Line 14:
   * Vivado and Vitis installations   * Vivado and Vitis installations
     * See [[programmable-logic:guides:installing-vivado-and-vitis]] for instructions on how to install these tools.     * See [[programmable-logic:guides:installing-vivado-and-vitis]] for instructions on how to install these tools.
-    * **Important!** At the time of writing, if using Microblaze, it is recommended to use an alternate version of the board files which better support the DDR memory present on some boards. This version of the board files can be downloaded via this link: [[https://github.com/Digilent/vivado-boards/archive/refs/heads/Microblaze-MIG.zip|Microblaze-MIG.zip]]. To install these files, follow the process found in the installation guide, linked above. These files are not yet fully tested.+    * You also need the board files for your board. This guide is intended for use with the board files available from Digilent's vivado-library repo on Github. You can get these files using the process described in the [[installing-vivado-and-vitis]] guide. These files will also be available through the Vivado application itself in versions 2022.1 and newer.
  
 **Note:** //If you are using a version of Vivado that includes Xilinx SDK (2019.1 or older), check out [[vivado/getting-started-with-ipi/2018.2]].// **Note:** //If you are using a version of Vivado that includes Xilinx SDK (2019.1 or older), check out [[vivado/getting-started-with-ipi/2018.2]].//