Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:eclypse-z7:getting-started-guide [2022/02/08 18:59] – [Running a Zmod Demo] Arthur Brownprogrammable-logic:eclypse-z7:getting-started-guide [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 53: Line 53:
 Digilent's [[vivado:installing-vivado:start]] guide goes step by step through the process of installing Vivado and Xilinx SDK. These are tools provided by Xilinx which allow a user to write hardware and software for a Xilinx FPGA chip, including the Zynq-7000 present on the Eclypse Z7. The guide also covers downloading and installing Digilent-provided board support files. At time of writing, materials for the Eclypse Z7 are only supported in Vivado 2019.1 and Xilinx SDK 2019.1. Digilent's [[vivado:installing-vivado:start]] guide goes step by step through the process of installing Vivado and Xilinx SDK. These are tools provided by Xilinx which allow a user to write hardware and software for a Xilinx FPGA chip, including the Zynq-7000 present on the Eclypse Z7. The guide also covers downloading and installing Digilent-provided board support files. At time of writing, materials for the Eclypse Z7 are only supported in Vivado 2019.1 and Xilinx SDK 2019.1.
  
-[[https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-design-tools.html|Petalinux 2019.1]] can be downloaded from Xilinx's website, and detailed installation instructions can be found in [[https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug1144-petalinux-tools-reference-guide.pdf|Xilinx User Guide 1144]]. Note that Petalinux is only supported in Linux-based operating systems. Windows users are recommended to either use a dual-boot setup or virtual machine. These requirements are further described in UG1144. At time of writing, materials for the Eclypse Z7 are only supported in Petalinux 2019.1.+[[https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-design-tools.html|Petalinux 2019.1]] can be downloaded from Xilinx's website, and detailed installation instructions can be found in [[https://docs.xilinx.com/v/u/2019.1-English/ug1144-petalinux-tools-reference-guide|Xilinx User Guide 1144]]. Note that Petalinux is only supported in Linux-based operating systems. Windows users are recommended to either use a dual-boot setup or virtual machine. These requirements are further described in UG1144. At time of writing, materials for the Eclypse Z7 are only supported in Petalinux 2019.1.
  
 ---- ----