Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
programmable-logic:eclypse-z7:demos:zmod-scope [2021/11/05 00:06] – [Download and Usage Instructions] Arthur Brownprogrammable-logic:eclypse-z7:demos:zmod-scope [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== Using the Eclypse Z7 and Zmod Scope with the Zmod Library ======+====== Using the Zmod Scope 1410-105 with the Zmod Library and Eclypse Z7 ======
  
-<WRAP round todo> +{{ :programmable-logic:eclypse-z7:demos:sw-demo-hw-setup.png?600 |}}
-== Under Construction == +
-</WRAP> +
- +
-FIXME add image+
  
 ---- ----
Line 22: Line 18:
     * //See [[vivado/getting_started/start]] for installation instructions.//     * //See [[vivado/getting_started/start]] for installation instructions.//
   * PetaLinux Installation compatible with the latest release of this demo (2019.1)   * PetaLinux Installation compatible with the latest release of this demo (2019.1)
-    * //See Xilinx's [[https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug1144-petalinux-tools-reference-guide.pdf|PetaLinux Tools Documentation (2019.1) (UG1144)]] for installation instructions.//+    * //See Xilinx's [[https://docs.xilinx.com/v/u/2019.1-English/ug1144-petalinux-tools-reference-guide|PetaLinux Tools Documentation (2019.1) (UG1144)]] for installation instructions.//
     * Only required if you want to rebuild the PetaLinux image     * Only required if you want to rebuild the PetaLinux image
   * Serial Terminal application to receive messages printed by the demo   * Serial Terminal application to receive messages printed by the demo
     * //See [[programmable-logic:guides:serial-terminals:start]] for more information.//     * //See [[programmable-logic:guides:serial-terminals:start]] for more information.//
 +  * Git is required to download the sources
  
   * A power supply for external power   * A power supply for external power
Line 35: Line 32:
 ===== Download and Usage Instructions ===== ===== Download and Usage Instructions =====
 The projects will be downloaded by cloning the [[https://github.com/Digilent/Eclypse-Z7|Eclypse Z7]] repo on Github. Use of git to obtain the sources is recommended. It is still possible to download ZIPs of the projects from Github but dependencies will need to be downloaded and placed in the correct locations manually. A Windows host can be used for either set of projects but will be unable to rebuild the PetaLinux project. The projects will be downloaded by cloning the [[https://github.com/Digilent/Eclypse-Z7|Eclypse Z7]] repo on Github. Use of git to obtain the sources is recommended. It is still possible to download ZIPs of the projects from Github but dependencies will need to be downloaded and placed in the correct locations manually. A Windows host can be used for either set of projects but will be unable to rebuild the PetaLinux project.
 +----
 <WRAP group> <WRAP column half> <WRAP group> <WRAP column half>
 Since Zmods are not hot-swappable, you should ensure that you plug the Zmod Scope into Zmod Port A on the Eclypse prior to powering the board on. Since Zmods are not hot-swappable, you should ensure that you plug the Zmod Scope into Zmod Port A on the Eclypse prior to powering the board on.
Line 41: Line 38:
 Get the power supply, USB cable, and ethernet cable plugged into the board. Additional setup will be performed in the "Setting up..." dropdowns, below, so don't turn the board on just yet. Get the power supply, USB cable, and ethernet cable plugged into the board. Additional setup will be performed in the "Setting up..." dropdowns, below, so don't turn the board on just yet.
 </WRAP> <WRAP column half> </WRAP> <WRAP column half>
-FIXME add hw setup image, the eclypse with both zmods plugged in, along with a USB cable and power supply (ethernet optional)+{{ :programmable-logic:eclypse-z7:demos:sw-demo-hw-setup.png?600 |}}
 </WRAP> </WRAP> </WRAP> </WRAP>
 +----
 Some stimulus should be provided to the Zmod Scope's CH1 SMA connector. The demo, without user modification, performs a capture immediately, providing a 1024-sample, 10 us long, buffer of data to the host. Some stimulus should be provided to the Zmod Scope's CH1 SMA connector. The demo, without user modification, performs a capture immediately, providing a 1024-sample, 10 us long, buffer of data to the host.
  
 +The results shown later in this document were produced by connecting CH1 to the first waveform generator channel of an [[test-and-measurement:analog-discovery-pro-3x50:start|Analog Discovery Pro (ADP3450)]] via a BNC cable and a BNC-to-SMA adapter.
 ---- ----
  
Line 66: Line 64:
 ---- ----
 <WRAP group> <WRAP column half> <WRAP group> <WRAP column half>
-When the project is run, data will be printed to a connected serial terminal, as seen in the screenshot to the right.+When the project is run, data will be printed to a connected serial terminal, as seen in the screenshot to the right. The data is printed in both volts and 14-bit raw twos-complement form, along with the time since the start of the buffer, tab-separated.
  
 When using the Linux project, the same data is written to a CSV file, which can be found in the ''/home/eclypse'' directory of the Eclypse's filesystem. When using the Linux project, the same data is written to a CSV file, which can be found in the ''/home/eclypse'' directory of the Eclypse's filesystem.
 </WRAP> <WRAP column half> </WRAP> <WRAP column half>
-FIXME add results image, a screenshot of the tera-term results of a simple capture, baremetal is fine+{{ :programmable-logic:eclypse-z7:demos:scope-results.png?600 |}}
 </WRAP> </WRAP> </WRAP> </WRAP>
 ---- ----
Line 81: Line 79:
 All materials related to the use of the Eclypse Z7 and Zmod Scope can be found on their resource centers, linked below: All materials related to the use of the Eclypse Z7 and Zmod Scope can be found on their resource centers, linked below:
   * [[../start|Eclypse Z7 Resource Center]]   * [[../start|Eclypse Z7 Resource Center]]
-  * [[/zmod/zmodadc/start|Zmod Scope Resource Center]]+  * [[zmod:scope:start|Zmod Scope Resource Center]]
  
 For technical support, please visit the [[https://forum.digilentinc.com/forum/4-fpga/|FPGA]] section of the Digilent Forum. For technical support, please visit the [[https://forum.digilentinc.com/forum/4-fpga/|FPGA]] section of the Digilent Forum.