Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
programmable-logic:cmod-s7:start [2022/09/12 11:34] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.comprogrammable-logic:cmod-s7:start [2022/10/04 04:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +    
 +====== Cmod S7 ======
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/cmod-s7-breadboardable-spartan-7-fpga-module/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/4-fpga/
 +| Title = Cmod S7
 +| Subtitle = Breadboardable Spartan-7 FPGA Module
  
 +| Header = Features
 +| Bullet = Full support for Vivado, including tool integration, example projects and tutorials
 +| Bullet = Breadboardable with 48-pin DIP form factor header
 +| Bullet = Pmod connector for add-on hardware devices
 +| Bullet = Programmable from JTAG and Quad-SPI flash
 +
 +| Header = Key FPGA Specifications
 +| Part Number = XC7S25-1CSGA225C
 +| Logic Slices = 3,650
 +| 6-input LUTs = 14,600
 +| Flip-Flops = 29,200
 +| Block RAM = 1,620 Kb
 +| DSP Slices = 80
 +| Clock Resources = 3 PLLs \\ 3 MMCMs \\ 12 MHz external clock
 +| Internal ADC = Dual-channel, 1 MSPS, connected to DIP pins 32 and 33
 +
 +| Header = Connectivity and On-board I/O
 +| USB = USB-UART \\ USB-JTAG programmer
 +| Pmod Connectors = 1
 +| Other Connectors = 48-pin DIP form factor header with 36 pins populated
 +| Buttons = 2 Push buttons
 +| LEDs = 4 LEDs, 1 RGB LED
 +
 +| Header = Electrical
 +| Power Inputs = USB or 5V external source connected to DIP pin 24
 +| Logic Level = 3.3V
 +
 +| Header = Physical
 +| Width = 0.7 in (1.78 cm)
 +| Length = 3.05 in (7.75 cm)
 +
 +| Header = Design Resources
 +| Mechanical Drawing = {{:reference:programmable-logic:cmod-s7:cmod_s7_dimensions.zip| DXF }}
 +
 +| Header = Product Compliance
 +| Width = 8473301180
 +| Length = EAR99
 +
 +}}
 +
 +{{page>reference-manual}} \\ \\
 + 
 +===== Documentation =====
 +{{topic>cmod-s7 +doc}}
 +
 +----
 +===== Tutorials =====
 +
 +  * [[programmable-logic:guides:installing-vivado-and-vitis]]
 +    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
 +  * [[programmable-logic:guides:getting-started-with-ipi]]
 +    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
 +  * [[programmable-logic:guides:getting-started-with-vivado]]
 +    * Walks through using Vivado to create a simple design that blinks a single LED.
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
 +    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
 +    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.
 +
 +----
 +===== Example Projects =====
 +{{topic>cmod-s7 +project}}
 +
 +----
 +===== Additional Resources =====
 +  * {{reference:programmable-logic:cmod-s7:cmods7.zip|Cmod S7 Step file}}
 +  * {{:reference:programmable-logic:cmod-s7:cmod_s7_dimensions.zip|Cmod S7 Mechanical Drawing }}
 +
 +----
 +
 +{{tag>programmable-logic programmable-logic-start cmod-s7 resource-center}}