Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
programmable-logic:cmod-a7:start [2022/09/08 13:39] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.comprogrammable-logic:cmod-a7:start [2022/10/04 04:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~  
 + 
 +====== Cmod A7 ====== 
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/cmod-a7-breadboardable-artix-7-fpga-module/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/4-fpga/
 +| Title = Cmod A7
 +| Subtitle = Breadboardable Artix-7 FPGA Module
 +| Header = Features
 +| Bullet = Programmable over JTAG and Quad-SPI Flash
 +| Bullet = 1 MSPS on-chip ADC
 +| Header = Key Specifications
 +| LUTs =  10,400 (15T) \\ 20,800 (35T)
 +| Flip-flops = 20,800 (15T) \\ 41,800 (35T)
 +| Block RAM = 112.5KB (15T) \\ 225KB (35T)
 +| SRAM = 512KB with an 8-bit bus \\ and 8ns access time
 +| Quad-SPI Flash = 4MB
 +| Header = Connectivity and Onboard I/O
 +| Pmod Connectors = 1 with 8 Digital I/O
 +| Connectors = 48-pin DIP with 44 Digital I/O \\ and 2 Analog inputs (0-3.3V)
 +| Buttons = 2
 +| LEDs = 2
 +| RGB LED = 1
 +| Header = Electrical
 +| Power = USB or external 3.3-5.5V supply
 +| Header = Physical
 +| Width = 0.7 in
 +| Length = 2.75 in
 +| Header = Design Resources
 +| Fritzing Part = {{ :reference:programmable-logic:cmod-a7:cmod_a7.fzpz |}}
 +| 3D STEP = {{ :reference:programmable-logic:cmod-a7:cmod_a7.zip |}}
 +| Vivado Board Files = [[/vivado/boardfiles2015 | 2015.1 and newer]] \\ [[/vivado/boardfilesold | 2014.4 and older]]
 +| Master XDC = {{https://raw.githubusercontent.com/Digilent/CmodA7/master/Resources/XDC/CmodA7_Master.xdc | GitHub}}
 +| Github Repo = {{:reference:programmable-logic:cmod-a7:cmoda7-master.zip|ZIP}}
 +| Header = Documentation
 +| Primary IC = [[https://docs.xilinx.com/v/u/en-US/ds181_Artix_7_Data_Sheet | XC7A15T & XC7A35T]] 
 +| Reference Manual = [[programmable-logic/cmod-a7/reference-manual]]
 +| Schematic = {{:reference:programmable-logic:cmod-a7:cmod_a7_sch.pdf|Rev. B}}
 +| Header = Design Resources
 +| 3D Model = {{:reference:programmable-logic:cmod-a7:Cmod_A7-3D.zip|STP Model}}
 +| Mechanical Drawing = {{:reference:programmable-logic:cmod-a7:cmod_a7_dimensions.zip|DXF }}
 +}} 
  
 +{{page>reference-manual}} \\ \\
 + 
 +===== Documentation =====
 +{{topic>cmod-a7 +doc -legacy}}
 +
 +  * {{reference:programmable-logic:cmod-a7:cmod_a7_sch.pdf|Cmod A7 Schematic (Rev. B)}}
 +  * {{reference:programmable-logic:cmod-a7:cmod_a7_sch_rev_c0.pdf|Cmod A7 Schematic (Rev. C)}}
 +
 +----
 +===== Tutorials =====
 +
 +  * [[programmable-logic:guides:installing-vivado-and-vitis]]
 +    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
 +  * [[programmable-logic:guides:getting-started-with-ipi]]
 +    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
 +  * [[programmable-logic:guides:getting-started-with-vivado]]
 +    * Walks through using Vivado to create a simple design that blinks a single LED.
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
 +    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
 +    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.
 +
 +  * [[learn/programmable-logic/tutorials/cmod-a7-programming-guide/start]]
 +  * [[learn/programmable-logic/tutorials/htsspisf/start]]
 +  * [[learn/programmable-logic/tutorials/program_fpgas_through_multisim/start]]
 +
 +----
 +
 +===== Example Projects =====
 +{{topic>cmod-a7 +project -legacy}}
 +
 +  * [[https://forum.digilentinc.com/topic/2866-cmod-a7-35t-demo-project/|Link to Community Project to test the XADC, GPIO, buttons, LEDs, and SRAM]]
 +
 +----
 +===== Additional Resources =====
 +  * [[http://www.xilinx.com/support/university/workshops.html | Xilinx Vivado Workshop Materials]]
 +  * {{:reference:programmable-logic:cmod-a7:cmod_a7_dimensions.zip|Cmod A7 Mechanical Drawing }}
 +
 +----
 +
 +{{tag>programmable-logic programmable-logic-start cmod-a7 resource-center}}