Differences

This shows you the differences between two versions of the page.

--- programmable-logic:cmod-a7:demos:xadc [2021/05/14 23:06] – ↷ Links adapted because of a move operation Arthur Brown
+++ programmable-logic:cmod-a7:demos:xadc [2022/10/04 11:38] (current) – external edit 127.0.0.1
@@ Line 15: / Line 15: @@
   * When BTN1 is pressed, the demo switches which xadc pin to read from.
-This demo uses XADC ports 4 and 12 since they are the channels connected to pin 15 and 16. This can be seen in the Cmod A7 Reference Manual and Schematics. These resources can be found on the Cmod A7 [[:reference:programmable-logic:cmod-a7:start:|Resource Center]].
+This demo uses XADC ports 4 and 12 since they are the channels connected to pin 15 and 16. This can be seen in the Cmod A7 Reference Manual and Schematics. These resources can be found on the Cmod A7 [[reference:programmable-logic:cmod-a7:start:|Resource Center]].
 ----
@@ Line 22: / Line 22: @@
   * Cmod A7 with MicroUSB programming cable
   * Vivado installation compatible with the latest release of this demo (2020.1)
-    *//See [[programmable-logic:guides:installation|Installing Vivado, Vitis, and Digilent Board Files]] for installation instructions.//
+    *//See [[programmable-logic:guides:installing-vivado-and-vitis|Installing Vivado, Vitis, and Digilent Board Files]] for installation instructions.//
   * Wires and a circuit to measure