Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
programmable-logic:basys-3:start [2022/09/20 10:59] – added note under Basys 3 programming guide link James Colvinprogrammable-logic:basys-3:start [2022/10/04 04:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +    
 +====== Basys 3======
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/basys-3-artix-7-fpga-trainer-board-recommended-for-introductory-users/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/4-fpga/
 +| Title = Basys 3
 +| Subtitle = Artix-7 FPGA Trainer Board
 +| Header = Features
 +| Bullet = On-chip analog-to-digital converter
 +| Header = Key Specifications
 +| FPGA Part # = XC7A35T-1CPG236C
 +| Logic Cells = 33,280 in 5200 slices
 +| Block RAM = 1,800 Kbits
 +| DSP Slices = 90
 +| Internal clock = 450 MHz+
 +| Header = Connectivity and Onboard I/O
 +| Pmod Connectors = 3
 +| Switches = 16
 +| Buttons = 5
 +| User LED = 16
 +| 7-Seg Display = 4-Digit
 +| VGA = 12-bit
 +| USB = HID Host (KB/Mouse/Mass Storage)
 +| Header = Electrical
 +| Power = USB \\ 5v (Pins)
 +| Logic Level = 3.3v
 +| Header = Physical
 +| Width = 2.8 in
 +| Length = 4.8 in
 +| Header = Design Resources
 +| Mechanical Drawing = {{:reference:programmable-logic:basys-3:basys_3_dimensions.zip|DXF }}
 +}}
  
 +
 +{{page>reference-manual}} \\ \\
 + 
 + ===== Documentation =====
 +{{topic>basys-3 +doc -legacy}}
 +
 +  * {{ :reference:programmable-logic:basys-3:basys-3_sch.pdf|Basys 3 Schematic (Rev. C)}}
 +  * {{ :reference:programmable-logic:basys-3:basys-3-sch-public-rev-d.pdf |Basys 3 Schematic (Rev. D)}}
 +
 +----
 +===== Tutorials =====
 +
 +  * [[programmable-logic:guides:installing-vivado-and-vitis]]
 +    * Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
 +  * [[programmable-logic:guides:getting-started-with-ipi]]
 +    * Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
 +  * [[programmable-logic:guides:getting-started-with-vivado]]
 +    * Walks through using Vivado to create a simple design that blinks a single LED.
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start]]
 +    * Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
 +    * It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.
 +
 +  * [[/learn/programmable-logic/tutorials/basys-3-programming-guide/start]]
 +
 +----
 +===== Example Projects =====
 +**Note:** //The latest version of Vivado supported by these projects is 2020.1.//
 +
 +  * [[./demos/abacus]]
 +  * [[./demos/gpio]]
 +  * [[./demos/keyboard]]
 +  * [[./demos/xadc]]
 +
 +----
 +===== Additional Resources =====
 +  * [[http://www.xilinx.com/support/university/workshops.html | Xilinx Vivado Workshop Materials]]
 +  * 3D CAD file -- {{reference:programmable-logic:basys-3:basys3.zip|STP file}}
 +  * {{:reference:programmable-logic:basys-3:basys_3_dimensions.zip| Basys3 Mechanical Drawing }}
 +  * [[https://www.mhprofessional.com/9781259837906-usa-digital-system-design-with-fpga-implementation-using-verilog-and-vhdl-group | Digital System Design With FPGA: Implementation Using Verilog And VHDL]]
 +  * [[learn/programmable-logic/tutorials/use-flip-flops-to-build-a-clock-divider/start]]
 +
 +----
 +
 +{{tag>programmable-logic programmable-logic-start basys-3 resource-center}}