Differences
This shows you the differences between two versions of the page.
| pmod:pmodtof:reference-manual [2022/03/30 09:48] – [Additional Information] Ana-Maria-Eliza Balas | pmod:pmodtof:reference-manual [2022/10/04 11:38] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 46: | Line 46: | ||
| All the registers used in the measurement and/or calibration process are described in the [[https:// | All the registers used in the measurement and/or calibration process are described in the [[https:// | ||
| - | There is a set of registers used at every chip initialization. The Chip Initialization routine is described in [[https:// | + | There is a set of registers used at every chip initialization. |
| - | These values (see table below) are set by Digilent and the user must be very careful changing them. In this situation the user must modify these values before performing manual calibration.\\ | + | |
| + | These values (see table below) are set by Digilent and the user must be very careful changing them. In this situation the user must modify these values before performing manual calibration. | ||
| Please read [[https:// | Please read [[https:// | ||