Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pmod:pmodtc1:start [2022/09/13 15:56] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.compmod:pmodtc1:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +   
 +====== Pmod TC1 ======
  
 +  
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pmod-tc1-k-type-thermocouple-module-with-wire/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
 +| Title = Pmod TC1
 +| Subtitle = K-Type Thermocouple Module with Wire
 +| Header = Features
 +| Bullet = K-type thermocouple-to-digital converter
 +| Bullet = Wide temperature range of -73°C to 482°C with provided wire
 +| Bullet = ±2°C accuracy from -200°C to 700°C
 +| Bullet = 14-bit with 0.25°C resolution
 +| Bullet = Cold-junction temperature compensation
 +| Bullet = 6-pin Pmod port with SPI interface
 +| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 2
 +| Header = Electrical
 +| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
 +| Specification Version = 1.2.0
 +| Logic Level = 3.3V
 +| Header = Physical
 +| Width = 1.0 in (2.54 cm)
 +| Length = 0.80 in (2.03 cm)
 +| Header = Documentation
 +| Primary IC = [[http://datasheets.maximintegrated.com/en/ds/MAX31855.pdf | MAX31855]]
 +| Thermocouple wire = {{pmod/pmod/tc1/pmodtc1_thermocouplewire.pdf | GG-K-24}}
 +| Reference Manual = [[pmod/pmodtc1/reference-manual]]
 +| Schematic = {{reference:pmod:pmodtc1:pmodtc1_sch.pdf| }}
 +| 3D Model = {{reference:pmod:pmodtc1:pmodtc1.zip| 3D Model}}
 +| Header = J1 Pinout
 +| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
 +| Pin 1 = CS
 +| Pin 2 = NC
 +| Pin 3 = MISO
 +| Pin 4 = SCLK
 +| Pin 5 = GND
 +| Pin 6 = VCC
 +}}
 +
 +{{page>reference-manual}} \\ \\
 + 
 +
 +===== Example Projects =====
 +==Microprocessor==
 +  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
 +  * {{:reference:pmod:pmodtc1:pmodtc1_mpide.zip|Library and MPIDE Example}}
 +  * [[http://www.instructables.com/id/Mpemba-Effect/|Mpemba Effect]] - Community Project
 +  * [[http://www.instructables.com/id/Reflow-Toaster-Oven/|Reflow Toaster Oven]] - Community Project
 +  * [[http://www.instructables.com/id/Plug-and-Play-Pmods-Using-LabVIEW/step4/LabVIEW-Code/|Plug and Play Pmods Using LabVIEW]] - Community Project
 +  * [[https://www.hackster.io/mmigs/using-the-pmod-tc1-with-arduino-uno-1b5ed1|Using the Pmod TC1 with Arduino Uno]] - Application note
 +==Programmable Logic==
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
 +     * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
 +
 +----
 +
 +===== Additional Resources =====
 +  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}
 +
 +----
 +
 +{{tag>pmod pmod-start pmod-spi pmodtc1 thermocouple resource-center}}