This is an old revision of the document!
Pmod OC1
Buy
Reference Manual
Technical Support
Pmod OC1
Open Collector Output
Features
- Four 100mA (200mA max) transistors
- Four output clamp diodes
- 40V voltage threshold
- 6-pin Pmod port with GPIO interface
- Follows the Digilent Pmod Interface Specification Type 1
Physical
Width
1.0 in (2.54 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1
P1
Pin 2
P2
Pin 3
P3
Pin 4
P4
Pin 5
GND
Pin 6
VCC
The Digilent Pmod OC1 (Revision C) uses open-collector BJTs to drive high current applications.
Example Projects
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Microprocessor
- Using the Pmod OC1 with Arduino Uno - Application note
Reference Projects
Additional Resources
- Specification Version 1.2.0: PDF