Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pmod:pmodmtds:start [2022/09/08 20:20] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.compmod:pmodmtds:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +   
 +====== Pmod MTDS  ======
 +  
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pmod-mtds-multi-touch-display-system/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
 +| Title = Pmod MTDS
 +| Subtitle = Smart touchscreen for easy to implement UIs
 +| Header = Features
 +| Bullet = 2.8" Display with QVGA resolution (320x240) 
 +| Bullet = 2 Finger Capacitive touch panel 
 +| Bullet = Powerful PIC32MZ Microcontroller
 +| Bullet = [[reference:software:mtds:start|Multi-Touch Display System (MTDS) Firmware]]
 +| Bullet = Design a beautiful UI with only a few lines of code using libraries for Arduino IDE and Xilinx SDK 
 +| Bullet = Easily draw images with binary transparency from files stored on microSD
 +| Bullet = Drop stylish buttons and check their status at will using intuitive function calls
 +| Bullet = For use with Arduino, chipKIT and Arty platforms
 +| Bullet = 6-pin Pmod port with SPI interface
 +| Header = Display Specifications
 +| Size = 2.8 inches
 +| Resolution = QVGA (320x240)
 +| Touchscreen = 2-Finger Multi-Touch
 +| Header = Electrical
 +| Bus = [[learn/fundamentals/communication-protocols/spi/start | SPI]]
 +| Specification Version = 1.2.0
 +| Logic Level = 3.3V
 +| Header = Physical
 +| Width = 3.45 in (8.76 cm)
 +| Length = 2.00 in (5.08 cm)
 +| Header = J1 Pinout
 +| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
 +| Pin 1 = ~CS
 +| Pin 2 = MOSI
 +| Pin 3 = MISO
 +| Pin 4 = SCLK
 +| Pin 5 = GND
 +| Pin 6 = VCC
 +| Pin 7 = NC
 +| Pin 8 = RESET
 +| Pin 9 = NC
 +| Pin 10 = NC
 +| Pin 11 = GND
 +| Pin 12 = VCC
 +}}
 +
 +{{page>reference-manual}} \\ \\
 + 
 +===== Tutorials =====
 +   * See the documentation for the [[software:mtds:start|Multi-Touch Display System]] software to get started.
 +
 +===== Example Projects and Libraries =====
 +
 +See the documentation for the [[software:mtds:start|Multi-Touch Display System]] software to get started.
 +== Microprocessor==
 +  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
 +
 +== Programmable Logic==
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
 +    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
 +
 +<WRAP center round tip 80%>
 +This product is in the process of being retired and will be sold as is until it is out of stock. To this end, software support for this product is limited to the materials provided by Digilent. There are no plans to update any existing Vivado and SDK/Vitis projects or Arduino/Digilent Core projects beyond the version they are provided in. Changes to the Xilinx toolchain between SDK and Vitis mean that the software libraries do not work as-is in Vitis and may require significant refactoring in order to get them to compile.
 +</WRAP>
 +
 +----
 +
 +===== Documentation =====
 +{{topic>pmodmtds +doc}}
 +
 +----
 +===== Additional Resources =====
 +  * [[https://forum.digilentinc.com/forum/7-add-on-boards/ | Add-ons Section of the Digilent Forum]]
 +  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}
 +  * {{:reference:pmod:pmodmtds:pmodmtd.zip|Pmod MTDS STP file}}
 +
 +----
 +
 +{{tag>pmod pmod-start pmod-spi pmodmtds mtds mtds-platform resource-center}}