Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pmod:pmodkypd:start [2022/09/08 20:50] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.compmod:pmodkypd:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +   
 +====== Pmod KYPD ======
  
 +  
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pmod-kypd-16-button-keypad/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
 +| Title = Pmod KYPD
 +| Subtitle = 16-button Keypad
 +| Header = Features
 +| Bullet = 16 momentary push-buttons
 +| Bullet = Can detect simultaneous button presses
 +| Bullet = Isolated rows and columns
 +| Bullet = 12-pin Pmod port with GPIO interface
 +| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 1
 +| Header = Electrical
 +| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
 +| Specification Version = 1.2.0
 +| Logic Level = 3.3V
 +| Header = Physical
 +| Width = 3.4 in (8.64 cm)
 +| Length = 2.7 in (6.86 cm)
 +| Header = Design Resources
 +| Fritzing Part = {{reference:pmod:pmodkypd:pmodkypd.fzpz| }}
 +| Header = Documentation
 +| Reference Manual = [[pmod/pmodkypd/reference-manual]]
 +| Schematic = {{reference:pmod:pmodkypd:pmodkypd_sch.pdf| }}
 +| 3D CAD file = {{reference:pmod:pmodkypd:Pmod_KYPD.zip| }}
 +| Header = J1 Pinout
 +| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
 +| Pin 1 = COL4
 +| Pin 2 = COL3
 +| Pin 3 = COL2
 +| Pin 4 = COL1
 +| Pin 5 = GND
 +| Pin 6 = VCC
 +| Pin 7 = ROW4
 +| Pin 8 = ROW3
 +| Pin 9 = ROW2
 +| Pin 10 = ROW1
 +| Pin 11 = GND
 +| Pin 12 = VCC
 +}}
 +
 +{{page>reference-manual}} \\ \\
 + 
 +
 +
 +===== Example Projects =====
 +==Microprocessor==
 +  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
 +  * {{:reference:pmod:pmodkypd:kypd.zip|Library and MPIDE Example}}
 +  * [[https://www.hackster.io/mmigs/using-the-pmod-kypd-with-arduino-uno-5a9a3c|Using the Pmod KYPD with Arduino Uno]] - Application note
 +==Programmable Logic==
 +  * {{:reference:pmod:pmodkypd:pmodkypd_demo_verilog.zip|Nexys 3 Verilog Example - ISE 14.2}}
 +  * {{:reference:pmod:pmodkypd:pmodkypd_ise_demo.zip|Nexys 3 VHDL Example - ISE 13.4}}
 +  * {{:reference:pmod:pmodkypd:pmodkypd_demo.zip|Nexys 3 VHDL Example - ISE 14.2}}
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
 +    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
 +
 +
 +----
 +
 +===== Additional Resources =====
 +  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}
 +
 +----
 +
 +{{tag>pmod pmod-start pmod-gpio pmodkypd keypad resource-center}}