Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pmod:pmodenc:start [2022/09/13 14:50] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.compmod:pmodenc:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +   
 +====== Pmod ENC  ======
 +  
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pmod-enc-rotary-encoder/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
 +| Title = Pmod ENC
 +| Subtitle = Rotary Encoder
 +| Header = Features
 +| Bullet = Rotary push-button shaft encoder
 +| Bullet = Add multiple types of user input to host board or project
 +| Bullet = Additional static slide switch
 +| Bullet = 6-pin Pmod port with GPIO interface
 +| Bullet = Follows the Digilent {{/reference/pmod/digilent-pmod-interface-specification.pdf |Pmod Interface Specification}} Type 1
 +| Header = Electrical
 +| Bus = [[learn/fundamentals/communication-protocols/gpio/start | GPIO]]
 +| Specification Version = 1.2.0
 +| Logic Level = 3.3V
 +| Header = Physical
 +| Width = 1.5 in (3.81 cm)
 +| Length = 0.80 in (2.03 cm)
 +| Header = Design Resources
 +| Fritzing Part = {{reference:pmod:pmodenc:pmodenc.fzpz| }}
 +| Header = Documentation
 +| Reference Manual = {{reference/pmod/pmodenc/pmodenc_rm.pdf|PDF }}
 +| Schematic = {{reference:pmod:pmodenc:pmodenc_sch.pdf|Pmod ENC schematic }}
 +| STP file = {{:reference:pmod:pmodenc:pmodenc_stp.zip|3D CAD file}}
 +| Header = J1 Pinout
 +| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
 +| Pin 1 = A
 +| Pin 2 = B
 +| Pin 3 = BTN
 +| Pin 4 = SWT
 +| Pin 5 = GND
 +| Pin 6 = VCC
 +}}
  
 +{{page>reference-manual}} \\ \\
 + 
 +
 +===== Example Projects =====
 +==Microprocessor==
 +  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
 +  * {{:reference:pmod:pmodenc:enc.zip|Library and MPIDE Example}}
 +  * [[http://www.instructables.com/id/Health-and-Security-Cloud-System-Digilent-Design-C/|Health and Security Cloud System]] - Community Project
 +  * [[http://www.instructables.com/id/Lab-test-bench-oscilloscopewaveform/|Lab test bench-oscilloscope/waveform ]] - Community Project
 +  * [[http://www.instructables.com/id/Color-Invaders/|Color Invaders]] - Community Project
 +  * [[https://www.hackster.io/mmigs/using-the-pmod-enc-with-arduino-uno-e65c0a|Using the Pmod ENC with Arduino Uno]] - Application note
 +==Programmable Logic==
 +  * {{:reference:pmod:pmodenc:pmodenc_demo_verilog.zip|Nexys 3 Verilog Example - ISE 14.2}}
 +  * {{:reference:pmod:pmodenc:pmodenc_ise_demo.zip|Nexys 3 VHDL Example - ISE 13.4}}
 +  * {{:reference:pmod:pmodenc:pmodenc_ise_demo_14-2.zip|Nexys 3 VHDL Example - ISE 14.2}}
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
 +    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
 +
 +
 +----
 +
 +===== Additional Resources =====
 +  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}
 +  * Pmod ENC STEP file: {{:reference:pmod:pmodenc:pmodenc_stp.zip|3D CAD file}}
 +
 +----
 +
 +{{tag>pmod pmod-start pmod-gpio pmodenc rotary-encoder resource-center}}