This is an old revision of the document!
Pmod DPOT
Buy
Reference Manual
Technical Support
Pmod DPOT
Digital Potentiometer
Features
- Digital potentiometer with 8-bit resolution
- Select desired resistance from 60 Ω to 10 kΩ
- Single or double tap detection
- 6-pin Pmod port with SPI interface
- Free fall detection
- Follows the Digilent Pmod Interface Specification Type 2
Physical
Width
0.9 in (2.28 cm)
Length
0.80 in (2.03cm)
J1 Pinout
Pin 1
~CS
Pin 2
MOSI
Pin 3
(NC)
Pin 4
SCLK
Pin 5
GND
Pin 6
VCC
The Digilent Pmod DPOT is a digital potentiometer allowing users to set a desired resistance anywhere from 60 to a nominal 10 kΩ.
Example Projects
Microprocessor
- Using the Pmod DPOT with Arduino Uno - Application note
- Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Additional Resources
- Specification Version 1.2.0: PDF