Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pmod:pmoddip:reference-manual [2022/09/13 17:13] – changed forum.digilentinc.com to forum.digilent.com jeff.greenberg_ni.compmod:pmoddip:reference-manual [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +====== Pmod DIP Reference Manual ======
 +The Digilent Pmod DIP is a 12-pin Dual-Inline Package (DIP) that also includes a 2x6 female Pmod™ header, allowing users to easily separate and process any signals traveling to and from their 12-pin Pmod. It allows for easy use of Digilent Pmods in DIP sockets and solderless breadboards.
  
 +{{Digilent Image Gallery 
 +| image = {{:reference:pmod:pmoddip:pmoddip-0.png?direct |}}
 +| image = {{:reference:pmod:pmoddip:pmoddip-1.png?direct |}}
 +| image = {{:reference:pmod:pmoddip:pmoddip-2.png?direct |}}
 +| image = {{:reference:pmod:pmoddip:pmoddip-3.png?direct |}}
 +}} 
 +
 +== Download This Reference Manual == 
 +  * {{:reference:pmod:pmoddip:pmoddip_rm.pdf| PDF}}
 +
 +----
 +
 +===== Features =====
 +  * 12-pin dual inline package module
 +  * 12-pin Pmod port for wire free breadboard connection
 +
 +----
 +
 +=====Functional Description =====
 +The %%Pmod DIP%% utilizes its 12 pass-through channels to route both digital and analog signals to and from the attached Pmod or other module. By being able to plug in the Pmod DIP into a solderless breadboard, external processing of the signals can be easily performed.
 +
 +----
 +===== Interfacing with the Pmod =====
 +The %%Pmod DIP%% communicates with the host board via the [[pmod:communication_protocols:gpio|GPIO protocol]]. As this is a pass-through module, all signals that are applied to each of the lanes will not be modified in any way.
 +
 +==== Pinout Description Table ====
 +
 +^  Pmod Header Pin  ^  DIP Header  ^  DIP Pin  |
 +|  1                |  J2          |  1        |
 +|  2                |  J2          |  2        |
 +|  3                |  J2          |  3        |
 +|  4                |  J2          |  4        |
 +|  5                |  J2          |  5        |
 +|  6                |  J2          |  6        |
 +|  7                |  J3          |  1        |
 +|  8                |  J3          |  2        |
 +|  9                |  J3          |  3        |
 +|  10               |  J3          |  4        |
 +|  11               |  J3          |  5        |
 +|  12               |  J3          |  6        |
 +
 +Any external power applied to the %%Pmod DIP%% must be within the limits that your system board and attached Pmod can handle.
 +----
 +===== Physical Dimensions =====
 +The pins on the pin header are spaced 100 mil apart. The PCB is 0.7 inches long and 0.5 inches wide. 
 +----
 +===== Additional Information =====
 +The schematics of the %%Pmod DIP%% are available {{pmod:pmod:pmoddip_sch.pdf|here}}. 
 +
 +As this is just a pass through module, no example code exists to properly demonstrate how to use the %%Pmod DIP%%.
 +
 +If you have any questions or comments about the %%Pmod DIP%%, feel free to post them under the appropriate section ("Add-on Boards") of the [[https://forum.digilentinc.com/|Digilent Forum]].