Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
pmod:pmodbt2:start [2022/09/09 22:56] – changed forum.digilentinc.com to forum.digilent.com fsoarespmod:pmodbt2:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +~~NOTOC~~ 
 +   
 +====== Pmod BT2 ======
 +
 +  
 +{{Digilent Infobox
 +| Store Page = https://digilent.com/shop/pmod-bt2-bluetooth-interface/
 +| Manual = [[reference-manual]]
 +| Support = https://forum.digilentinc.com/forum/7-add-on-boards/
 +| Title = Pmod BT2
 +| Subtitle = Bluetooth Interface
 +| Header = Features
 +| Bullet = Bluetooth 2.1/2.0/1.2/1.0 compatible
 +| Bullet = Add wireless capability with this low power, Class 2 Bluetooth radio
 +| Bullet = Supports HID profile for making accessories such as pointing devices, etc.
 +| Bullet = Secure communications, 128-bit encryption
 +| Bullet = Six different modes
 +| Bullet = 12-pin Pmod port with UART interface
 +| Header = Electrical
 +| Bus = [[learn/fundamentals/communication-protocols/uart/start | UART]]
 +| Specification Version = 1.2.0
 +| Logic Level = 3.3V
 +| Header = Physical
 +| Width = 1.5 in (3.81 cm)
 +| Length = 0.80 in (2.03 cm)
 +| Header = Design Resources
 +| Fritzing Part = {{:reference:pmod:pmodbt2:pmodbt2.fzpz| }}
 +| Header = Documentation
 +| Primary IC = [[http://www.microchip.com/wwwproducts/en/RN42 | RN-42]]
 +| Reference Manual = [[pmod/pmodbt2/reference-manual]]
 +| Schematic = {{:reference:pmod:pmodbt2:pmodbt2_sch.pdf| }}
 +| Header = J1 Pinout
 +| Full Row = {{ :reference:pmod:pmod-pinout-2x6.png?direct |}}
 +| Pin 1 = RTS
 +| Pin 2 = RXD
 +| Pin 3 = TXD
 +| Pin 4 = CTS
 +| Pin 5 = GND
 +| Pin 6 = VCC
 +| Pin 7 = STATUS
 +| Pin 8 = RST
 +| Pin 9 = NC
 +| Pin 10 = NC
 +| Pin 11 = GND
 +| Pin 12 = VCC
 +| Header = J2 Pinout
 +| Full Row = {{ :reference:pmod:pmod-pinout-1x6.png?direct |}}
 +| Pin 1 = MISO
 +| Pin 2 = MOSI
 +| Pin 3 = SCK
 +| Pin 4 = CS
 +| Pin 5 = GND
 +| Pin 6 = VCC
 +}}
 +
 +{{page>reference-manual}} \\ \\
 +
 +
 +===== Example Projects =====
 +==Microprocessor==
 +  * [[learn/software/tutorials/digilent-core-install/start | Installing the Digilent Core for Arduino]]
 +  * {{:reference:pmod:pmodbt2:PmodBT2 Library + Demo.zip|Library and MPIDE Example}}
 +  * [[http://www.instructables.com/id/Team-Awesome-Job-The-Interactive-Notification-Case/?ALLSTEPS |Team Awesome Job: The Interactive Notification Case (I.N.C.)]] - Community Project
 +  * [[http://www.instructables.com/id/Persistence-of-Vision-LED-Display/?ALLSTEPS|Persistence of Vision LED Display]] - Community Project
 +  * [[http://www.instructables.com/id/WSU-Hardware-Hackathon-Encrypted-Key-unlocking-Dra/?ALLSTEPS|Encrypted Key unlocking Drawer]] - Community Project
 +  * [[http://www.instructables.com/id/Controlling-Servos-via-Bluetooth-RN-42-and-LabVIEW/|Controlling Servos via Bluetooth (RN-42) and LabVIEW]] - Community Project
 +{{topic>pmodbt-2 +project}}
 +
 +==Programmable Logic==
 +  * [[learn/programmable-logic/tutorials/pmod-ips/start | Getting Started with Digilent Pmod IPs]]
 +    * Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
 +
 +
 +
 +----
 +
 +===== Additional Resources =====
 +  * Specification Version 1.2.0: {{reference/pmod/pmod-interface-specification-1_2_0.pdf |PDF}}
 +  * [[http://ww1.microchip.com/downloads/en/DeviceDoc/bluetooth_cr_UG-v1.0r.pdf|RN42 User Manual]]
 +
 +----
 +
 +
 +{{tag>pmod pmod-start pmod-uart pmodbt2 bluetooth resource-center}}