Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ni:mxp_shield_adapter [2014/11/06 01:02] – Steve Johnsonni:mxp_shield_adapter [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== Shield Adapter for myRIO ====== +====== Shield Adapter for NI myRIO Resource Center======
-{{:ni:shieldadapter-600.png?200|}}+
  
-**Overview**+{{ :ni:shield_adapter-obl-600.png?500 |}}
  
-With the Shield Adapter for myRIO, you can now connect your myRIO to the expansive shield options offered by the Arduino™ ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino Uno using the 3.3 or 5V power from the myRIO MXP connector. The silk screen is labeled on the shield pins to reflect the myRIO inputs.+<WRAP round info 650px> 
 +===Note=== 
 +The Shield Adapter for NI myRIO has been retired and is no longer for sale in our store. 
 +</WRAP>
  
-Features include:+**Welcome to the resource center for the Shield Adapter for NI myRIO!**
  
-  * Uses the [[http://zone.ni.com/reference/en-XX/help/373925A-01/myriohelp/myrio_connector_pinouts/| myRIO Expansion Port (MXP) connector]] +Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down.
-  * Signal and power lines adapted to the standard Arduino™ Uno footprint. +
-  * I2C is hardwired to A4 and A5 pins and adheres to the revised [[http://arduino.cc/en/Main/arduinoBoardLeonardo|Arduino Leonardo standard]] +
-  * Standard 34-pin female breakout +
-  * Switch allows users to select between UART and DIO pins 0 and 1 +
-  * No external power required for shields operating at 3.3V or 5V+
  
-**Configuring the Adapter**+With the Shield Adapter for NI myRIO, you can now connect your myRIO to the expansive shield options offered by the Arduino™ ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino Uno using the 3.3 or 5V power from the myRIO MXP connector. The silk screen is labeled on the shield pins to reflect the myRIO inputs. 
  
  
-**Using the Adapter with myRIO** 
  
 +----
 +===== Documentation =====
  
-**Compatibility Notes**+  * **Schematic** -- {{:ni:shield_adapter_sch.pdf|PDF}} 
 +    * PDF Schematic of the PCB generated by Altium 
 +  * **Reference Manual** -- [[ni:mxp_shield_adapter:refmanual|Wiki]] 
 +    * Technical description of the Shield Adapter and all of its features.  
 +  * **Sell Sheet** -- Sell Sheet is currently unavailable, please see the reference manual for product detail 
 +  * **Fritzing Part**  
 +    *{{shield_adapter.fzpz|FZPZ - rev 1}} 
 +    * The Fritzing part that can be uploaded and used to create circuit images.
  
 +----
  
 +===== External Links =====
 +  * [[https://forum.digilent.com|Digilent Forum]]
 +  * [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/212736|NI]]
  
 +{{tag>resource-center}}