Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ni:mxp_nxt_adapter [2014/11/19 18:52] – Jim O'Dellni:mxp_nxt_adapter [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== NXT Sensor Adapter for myRIO ====== +====== NXT Sensor Adapter for NI myRIO Resource Center======
-{{:ni:nxtsensoradapter-600.png?200|}}+
  
-**Overview** +{{ :ni:nxt_sensor_adapter-obl-600.png?500 |}}
-With the NXT Sensor Adapter for myRIO, you can now connect your myRIO to the expansive NXT sensor options offered for the myRIO and  LEGO® MINDSTORMS® NXT ecosystems. The NXT Sensor Adapter is designed to work with any NXT sensor under 9V, you can access the 3.3 or 5V power directly from the myRIO MXP connector. The silk screen is labeled on the 6 pin breakout header to reflect the Multiplexer inputs. +
  
-Features Include:  +<WRAP center round important 60%> 
-  * Uses the myRIO Expansion Port (MXP) connector.  http://zone.ni.com/reference/en-XX/help/373925A-01/myriohelp/myrio_connector_pinouts/.   +The NXT Sensor Adapter for the NI myRIO is a limited time product. Once the current stock is depleted, it will be discontinued in our store. 
-  * Supports both passive and digital NXT sensors (under 9V) +</WRAP>
-  * 3 LEGO® MINDSTORMS® NXT sensor connectors and standard 6 pin female breakout allowing direct access to single pins.  +
-  * No external power required.  +
-  * Standard 34-pin female breakout allowing direct access to signal pins.+
  
-^ myRIO MXP Port Pin#            ^ myRIO Pin Function    ^ J3/J4 Pin#        ^ J3 Pin Name     ^ J4 Pin Name     ^ +**Welcome to the resource center for the NXT Sensor Adapter for NI myRIO!**
-| 1    | 5V                         | 1              | ANA           | AI2           | +
-| 2    | AO0                        | 2, 3           | GND           | GND           | +
-| 3    | AI0                        | 4              | Ipower        | 5V            | +
-| 4    | AO1                        | 5              | DIO0/SCL      | SCL2          | +
-| 5    | AI1                        | 6              | DIO1/SDA      | SDA2          | +
-| 6, 8, 12, 16, 20, 24, 28, 30 | GND |               |               |               | +
-| 7    | AI2                        |                |               |               | +
-| 9    | AI3                        |                |               |               | +
-| 10   | UART-RX                     ^ J5/J6 Pin#  ^    J5 Pin Name ^  J6 Pin Name ^   +
-| 11   | DIO0                       | 1              | ANA           | AI1           | +
-| 13   | DIO1                       | 2, 3           | GND           | GND           | +
-| 14   | UART-TX                    | 4              | Ipower        | 5V            | +
-| 15   | DIO2                       | 5              | DIO0/SCL      | SCL1          | +
-| 17   | DIO3                       | 6              | DIO1/SDA      | SDA1          | +
-| 18   | DIO11/ENC-A                |                |               |               | +
-| 19   | DIO4                       |                |               |               | +
-| 21   | DIO5/SPI-CLK               ^ J7/J8 Pin#  ^    J7 Pin Name ^  J8 Pin Name ^   +
-| 22   | DIO12/ENC-B                | 1              | ANA           | AI0           | +
-| 23   | DIO6/SPI-MISO              | 2, 3           | GND           | GND           | +
-| 25   | DIO7/SPI-MOSI              | 4              | Ipower        | 5V            | +
-| 26   | DIO13                      | 5              | DIO0/SCL      | SCL0          | +
-| 27   | DIO8/PWM0                  | 6              | DIO1/SDA      | SDA0          | +
-| 29   | DIO9/PWM1                  |                |               |               | +
-| 31   | DIO10/PWM2                 |                |               |               | +
-| 32   | DIO14/I2C-SCL              |                |               |               | +
-| 33   | 3V3                        |                |               |               | +
-| 34   | DIO15/I2C-SDA              |                |               |               | +
- +
  
 +Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the NXT Sensor Adapter, visit the product page on our main website: [[https://digilent.com/shop/nxt-sensor-adapter-for-ni-myrio/|NXT Sensor Adapter for NI myRIO]]
 +
 +The NXT Sensor Adapter for the NI® myRIO is designed to bring the popular Lego® Mindstorms® NXT sensors to the myRIO ecosystem. The NXT Sensor Adaptor connects to one of the 34-pin MXP ports on your NI myRIO and breaks out the myRIO Analog, Digital, and I2C channels to three standard NXT input ports. Additionally, all three NXT sensor ports have female jumper connections for directly probing NXT sensor signals or connecting your own custom solutions. 
 +
 +This board will support "passive” and “digital” Lego-certified sensors. This includes light, sound, touch, compass, tilt, color, force and magnetic sensors. 
 +
 +
 +
 +
 +----
 +===== Documentation =====
 +
 +  * **Schematic** -- {{:ni:nxt_sensor_adapter_sch.pdf|PDF}}
 +    * PDF Schematic of the PCB generated by Altium
 +  * **Reference Manual** -- [[ni:mxp_nxt_adapter:refmanual|Wiki]]
 +    * Technical description of the NXT Sensor Adapter and all of its features. 
 +  * **Sell Sheet** -- Sell Sheet is currently unavailable, please see the reference manual for product detail
 +  * **Fritzing Part** 
 +    *{{nxt_sensor_adapter_for_ni_myrio.fzpz|FZPZ - rev 1}}
 +    * The Fritzing part that can be uploaded and used to create circuit images.
 +
 +----
 +
 +===== External Links =====
 +  * [[https://forum.digilent.com|Digilent Forum]]
 +  * [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/212737|NI]]
 +
 +{{tag>resource-center}}