Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
ni:mxp_myproto_accessory [2015/06/18 19:29] – created Robert Prewni:mxp_myproto_accessory [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== myProto Accessory Board for myDAQ ====== +====== myProto Accessory Board Resource Center======
-{{:ni:myproto-top-600.png?nolink&200|}}+
  
-**Overview**+{{ :ni:myproto-obl-600.png?400 |}}
  
-The Digilent myProto accessory board for NI myDAQ attaches directly to the myDAQ and brings all myDAQ signals to breadboard connections where they can be easily accessed using simple jumper wires. The myProto also includes several additional useful I/O devices. Signal names on the myProto breadboards indicate which myDAQ signals and onboard devices are attached to which breadboard pins. All Ground connections on the myProto breadboards are connected into a single Ground node on the myProto device.+<WRAP center round important 60%> 
 +The myProto Accessory Board is retired and no longer for sale in the Digilent store.  
 +</WRAP>
  
-Features:+**Welcome to the resource center for the myProto Accessory Board!**
  
-  * SOlderless Breadboard +Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the myProto board, visit the product page on our main website: [[https://digilent.com/shop/myproto-protoboard-for-ni-mydaq-myrio/|myProto Accessory Board]]
-  * All myDAQ signals accessible from breadboards +
-  * 3 onboard user LEDs +
-  * 1 10k potentiometer +
-  * 2 Audio Jacks +
-  * External power connector for breadboard circuits +
-  * Switches on all power supplies +
-  * Uses the [[http://zone.ni.com/reference/en-XX/help/373925A-01/myriohelp/myrio_connector_pinouts/| Mini System Port (MSP) connector]]+
  
-**Pin Connections** +The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. 
-^ Pin ^ Function ^ +
-|AJ1 S1| Audio Jack 1 Sleeve | +
-|AJ1 T1| Audio Jack 1 Tip | +
-|AJ1 R1| Audio Jack 1 Ring | +
-|PWR +15V| myDAQ +15V supply | +
-|PWR -15V| myDAQ -15V supply | +
-|AJ2 S2| Audio Jack 2 Sleeve | +
-|DIG GND| Digital GND | +
-|DIG DIO0| Digital I/O 0 | +
-|DIG DIO1| Digital I/O 1 | +
-|DIG DIO2| Digital I/O 2 | +
-|DIG DIO3| Digital I/O 3 | +
-|AJ2 T2| Audio Jack 2 Tip | +
-|AJ2 R2| Audio Jack 2 Ring | +
-|PWR 5V| myDAQ +5V supply | +
-|PWR GND| Ground | +
-|PWR Vext| From Vext Jack | +
-|AO GND| Ground | +
-|AO 0| Analog Out Pin 0 | +
-|DIG DIO4| Digital I/O 4 | +
-|DIG DIO5| Digital I/O 5 | +
-|DIG DIO6| Digital I/O 6 | +
-|DIG DIO7| Digital I/O 7 | +
-|LED G| Green LED | +
-|AO 1| Analog Out Pin 1| +
-|AI0 GND| Analog In Ground| +
-|AI0 0+| Analog In Ch0+ | +
-|AI0 0-| Analog In Ch0- | +
-|AI1 GND| Analog In Ground | +
-|AI1 1+| Analog In Ch1+ | +
-|AI1 1-| Analog In Ch1- | +
-|LED Y| Yellow LED | +
-|LED R| Red LED | +
-|Pot CCW| Pot Counter-CW | +
-|Pot Wiper| Pot Wiper | +
-|Pot CW| Pot CW |+
  
-Please visit the [[http://www.ni.com/mydaq/| myDAQ]] page at National Instruments for more information about the myDAQ+The MSP connector on your myDAQ / myRIO provides power (+5 VDC and ±15 VDC) along with eight configurable digital I/O pins, two analog inputs, and two analog outputs. All of these signals are available and clearly labeled on the signal blocks at the top of the breadboard when plugged into the MSP connector.  
 + 
 + 
 + 
 +---- 
 +===== Documentation ===== 
 + 
 +  * **Schematic** -- Schematic is currently unavailable, please see the reference manual for product detail 
 +  * **Reference Manual** -- [[ni:mxp_myproto_accessory:refmanual|Wiki]] {{:ni:myproto_rm.pdf|PDF}} 
 +    * Technical description of the myProto board and all of its features.  
 +  * **Sell Sheet** -- Sell Sheet is currently unavailable, please see the reference manual for product detail 
 +  * **Fritzing Part**  
 +    *{{:myproto_accessory_board.fzpz|FZPZ - rev 1}} 
 +    * The Fritzing part that can be uploaded and used to create circuit images. 
 + 
 +---- 
 + 
 +===== External Links ===== 
 +  * [[https://forum.digilent.com|Digilent Forum]] 
 +  * [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/212343|NI]] 
 + 
 +{{tag>resource-center}}