Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
ni:mxp_mydigital_accessory [2015/06/18 20:20] – created Robert Prewni:mxp_mydigital_accessory [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== myDigital Accessory Board for NI myDAQ ======+====== myDigital Accessory Board Resource Center ======
  
-**Overview**+{{ :ni:mydigital_protoboard-obl-600.png?400 |}}
  
-The Digilent myDigital accessory baord for the NI myDAQ is designed to work in conjunction with myDAQ to provide students a cost-effective, portable, and engaging platform for teaching electronics. Along with NI Multisim the myDigital and myDAQ provide everything needed to allow students to design, construct, and test basic analog and digital designs.+**Welcome to the resource center for the myDigital Accessory Board for NI myDAQ & myRIO!**
  
-{{:ni:mydigital_protoboard-obl-600.png?nolink&300|}}+Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the myDigital, visit the product page on our main website: [[https://digilent.com/shop/mydigital-protoboard-for-ni-mydaq-myrio/|myDigital for NI myDAQ & myRIO]]
  
-Features include: +The Digilent myDigital accessory board for the NI myDAQ and NI myRIO is designed to provide students a cost-effective, portable, and engaging platform for teaching electronics. With a myDAQ / myRIO, NI Multisim, and a myDigital, you'll have everything needed to allow students to design, construct, and test basic analog and digital designs. 
-  * Power supply connector for stand-alone use +
-  * NI myDAQ miniSystem port connector +
-  * Breadboard area +
-  * Seven-segment LED displays +
-  * Buttons (momentary switches) +
-  * Slide switches +
-  * Discrete LEDs +
-  * Onboard power regulator+
  
-====== 1 Using the Digilent myDigital ======+The MSP connector on your myDAQ / myRIO provides power (+5 VDC and ±15 VDC) along with eight configurable digital I/O pins, two analog inputs, and two analog outputs. All of these signals are available and clearly labeled on the signal blocks at the top of the breadboard when plugged into the MSP connector. 
  
-NI myDAQ provides power (+5 VDC and  ±15 VDC) along with eight configurable digital I/O pins, two analog inputs, and two analog outputs. All of these signals are available to the myDigital at the first two signal blocks at the top of the breadboard when plugged into the MSP connector. Refer to the NI myDAQ User Guide and Specifications for detailed specifications on these inputs/outputs. NI myDAQ includes software for using these inputs/outputs for signal generation and measurement, including a two-channel oscilloscope, voltmeter, function generator, digital pattern generator, and more. Separate banana jacks on myDAQ connect to the DMM and allow for accurate measurement of resistance, current, and voltage. All I/O on NI myDAQ is also programmable using LabVIEW™, making it easy to create custom instruments or student projects that incorporate graphical user interfaces. 
  
-====== 2 Power Supply ====== 
  
-The myDigital can be powered from the myDAQ or power can be brought onto the breadboard through the +---- 
-external power jack. The connector is a standard coaxial power connector (5.5 mm × 2.1 mm) commonly available on DC wall adapters (17 VDC max). An onboard regulator supplies fixed 3.3 or 5 VDC (jumper configurable) fromthis external power. Both the raw external power and the regulated power are available at the terminal block (Vext and Vreg).+===== Documentation =====
  
-====== 3 Switches and Displays ======+  * **Schematic** -- Schematic is currently unavailable, please see the reference manual for product detail 
 +  * **Reference Manual** -- [[ni:mxp_mydigital_accessory:refmanual|Wiki]] {{:ni:mydigital_rm.pdf|PDF}} 
 +    * Technical description of the myDigital and all of its features.  
 +  * **Sell Sheet** -- Sell Sheet is currently unavailable, please see the reference manual for product detail 
 +  * **Fritzing Part**  
 +    *{{:mydigital_accessory_board.fzpz|FZPZ - rev 1}} 
 +    * The Fritzing part that can be uploaded and used to create circuit images.
  
-==== 3.1 Switches ====+----
  
-Switches S0 through S3 are slide switches that provide +5 V (1) at the respective terminal block contacts when in the ON position and GND (0) when in the OFF position. Current limited with 200 Ω series resistor.+===== External Links ===== 
 +  * [[https://forum.digilent.com|Digilent Forum]] 
 +  * [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/211702|NI]]
  
-==== 3.2 Buttons ==== +{{tag>resource-center}}
- +
-Buttons B0 through B3 are push-button switches that provide +5 V (1) at the respective terminal block contacts when pushed and GND when released. Current limited with 200 Ω series resistor. +
- +
-==== 3.3 Discrete LEDs ==== +
- +
-Individual LED indicators arranged to create three configurations: two "traffic light" style patterns (R1, Y3, G1 and R0, Y1, G0), a horizontal series of a single color (Y3, Y2, Y1, Y0), and a "die" pattern (R1, Y3, G1, Y2, R0, Y1, G0). LEDs can be energized by connecting their terminal block contacts to +5 V (current limiting is built into the board). +
- +
-==== 3.4 Seven-Segment Display ==== +
- +
-The myDigital has two standard seven-segment displays with direct access to each LED segment (A through G). Use DIG0 and DIG1 terminals to select which digit is enabled by connecting that signal to GND (0) (normally pulled-up or disabled). Connect DISP1 terminals (A through G) high (+5 V) to turn segment ON. Both displays can be used by rapidly alternating between digits.+