Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ni:mxp_high_current_adapter [2015/06/03 15:19] – Lucian Daleni:mxp_high_current_adapter [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== High Current Adapter for NI myRIO ====== +====== High Current Adapter Resource Center ====== 
-{{:ni:highcurrentadapter-600.png?200|}}+{{ :ni:highcurrentadapter-600.png?400 |}}
  
-**Overview**+<WRAP center round important 60%> 
 +The High Current Adapter for NI myRIO is a Limited Time product. Once the current stock is depleted, it will be discontinued in our store. 
 +</WRAP>
  
-The High Current Adapter for NI myRIO allows you drive high power low speed currents using relays and open drain N-FET otputs trough MXP connector on your myRIO. The switched signals are connected with screw terminals. For open drains a power supply is needed.+**Welcome to the resource center for the High Current Adapter for NI myRIO!**
  
-Key Features:+Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the High Current Adapter, visit the product page on our main website: [[https://digilent.com/shop/high-current-adapter-for-ni-myrio/|High Current Adapter for NI myRIO]]
  
-  * Supports 3V...16V power voltage(external power supply required) +With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. 
-  * 4 Open drain outputs +(For motor applications, please see the [[ni:mxp_motor_adapter|myRIO Motor Adapter Board]]) 
-      *Continuous current:3.0A(25°C)/2.2A(85°C) +
-      * Peak output current:4.1A(t<5s) +
-  * 4 Standard 3 terminal relay outputs +
-      * Common, Normally Closed, Normally Open +
-      * Relay output max switching voltage:30V +
-      * Rated current:1A +
-  * 34-pin female breakout allowing direct access to signal pins +
-  * Uses the myRIO Expansion Port(MXP) connector+
  
 +The High Current Adapter is able to run applications from 3V-16V and can deliver current up to 4A, providing users with a way to plug their applications in directly without any additional electronics required.
  
  
 +
 +----
 +===== Documentation =====
 +
 +  * **Schematic** -- {{:ni:high_current_adapter_for_ni_myrio_sch.pdf |Schematic PDF}}
 +  * **Reference Manual** -- [[ni:mxp_high_current_adapter:refmanual|Wiki]]
 +    * Technical description of the High Current Adapter and all of its features. 
 +  * **Sell Sheet** -- Sell Sheet is currently unavailable, please see the reference manual for product detail
 +  * **Fritzing Part** 
 +    *{{high_current_adapter.fzpz|FZPZ - rev 1}}
 +    * The Fritzing part that can be uploaded and used to create circuit images.
 +
 +----
 +
 +===== External Links =====
 +  * [[https://forum.digilent.com|Digilent Forum]]
 +  * [[http://sine.ni.com/nips/cds/view/p/lang/en/nid/212738|NI]]
 +
 +{{tag>resource-center}}