Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
nexys:nexysvideo:gpiodemo [2015/06/09 17:13] – [Features Used] Sam Lowenexys:nexysvideo:gpiodemo [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 38: Line 38:
 You will need...\\ You will need...\\
  
-1. Vivado installed on your computer\\ +1. Vivado 15.1 installed on your computer\\ 
-2. Nexys4 board from digilent\\ +2. Nexys Video board from digilent\\
-3. Headphones or speaker +
  
 ==== 1. Download the Project ==== ==== 1. Download the Project ====
Line 49: Line 47:
 ==== 2. Load the Vivado Project ==== ==== 2. Load the Vivado Project ====
  
-In your now unzipped project, open the file Nexys4_Vivado_Basic.xpr. This should open your project in Vivado. +In your now unzipped project, open the file NexysVideoGPIO.xpr. This should open your project in Vivado. 
  
 *The screenshots below are from another project but should look relatively the same and will work for our purposes. *The screenshots below are from another project but should look relatively the same and will work for our purposes.
Line 62: Line 60:
 {{:basys3:buildflow.png?600|}} {{:basys3:buildflow.png?600|}}
  
-==== 4. Connect and Program the Nexys4 ====+==== 4. Connect and Program the Nexys Video ====
  
 Once you have generated your bit file, Click on the hardware manager and connect to your board by choosing the local server option. Once you have generated your bit file, Click on the hardware manager and connect to your board by choosing the local server option.
Line 68: Line 66:
 {{:basys3:device_connected.png?600|}} {{:basys3:device_connected.png?600|}}
  
-After your board is connected, just click program to load the GPIO demo onto your Nexys4.+After your board is connected, just click program to load the GPIO demo onto your Nexys Video.
  
 ===== Running the Nexys4 Basic User Demo ===== ===== Running the Nexys4 Basic User Demo =====