Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
nexys:nexys4:gsg [2014/11/18 22:13] – Thomas Kappenmannexys:nexys4:gsg [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 9: Line 9:
 To power on the Nexys4, you will need a micro-USB cable. Plug this cable into the JTAG slot on the Nexys4, plug the other end into your computer, and flip the power switch to the "On" position. This will begin the out of box demo. To power on the Nexys4, you will need a micro-USB cable. Plug this cable into the JTAG slot on the Nexys4, plug the other end into your computer, and flip the power switch to the "On" position. This will begin the out of box demo.
  
-More information on this startup demo can be found [[basys3:gpiodemo#running_the_basys3_gpio_demo|here]]FIXME.+More information on this startup demo can be found [[nexys:nexys4:userdemo#Running_the_Nexys4_User_Demo|here]].
 ----- -----
 =====Getting Started with Vivado===== =====Getting Started with Vivado=====
Line 15: Line 15:
 This video will give you step by step instructions to get started with your Nexys4. This video will give you step by step instructions to get started with your Nexys4.
  
-The files needed for this demo can be downloaded by clicking {{:basys3:abacus_verilog_srcfiles_10_1_2014.zip|here}}. You'll also need the constraints file which can be downloaded [[http://digilentinc.com/Data/Products/NEXYS4/Nexys4_Master_xdc.zip|here]].+The files needed for this demo can be downloaded by clicking {{:nexys:nexys4:abacus_verilog_srcfiles.zip|here}}. You'll also need the constraints file which can be downloaded [[http://digilentinc.com/Data/Products/NEXYS4/Nexys4_Master_xdc.zip|here]].
  
 More information on the Abacus project can be found [[basys3:abacus|here]]. More information on the Abacus project can be found [[basys3:abacus|here]].
Line 68: Line 68:
  
 ====Working with Vivado==== ====Working with Vivado====
-FIXME 
  
 On the home page, you will see the files that you imported earlier in the "Sources" box. On the home page, you will see the files that you imported earlier in the "Sources" box.
Line 156: Line 155:
  
 Select the .bin file where it asks for a configuration file and finally click OK. Select the .bin file where it asks for a configuration file and finally click OK.
-{{ :basys3:34.png?nolink&500 |}}+{{ :nexys:nexys4:program_config.png?nolink&500 |}}
  
 Vivado will now erase the old configuration file, and reprogram your Nexys4 with the Abacus demo file. From now on, when you power cycle the Nexys4, the abacus demo will load at startup. Vivado will now erase the old configuration file, and reprogram your Nexys4 with the Abacus demo file. From now on, when you power cycle the Nexys4, the abacus demo will load at startup.