Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
microprocessor:max32:reference-manual [2021/05/14 23:03] – ↷ Page moved from reference:microprocessor:max32:reference-manual to microprocessor:max32:reference-manual Arthur Brownmicroprocessor:max32:reference-manual [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 311: Line 311:
 ====== 4 Reloading the MPIDE bootloader ====== ====== 4 Reloading the MPIDE bootloader ======
  
-Using the Microchip development tools to program the Max32 board will cause the boot loader to be erased. To use the board with the MPIDE again, it is necessary to program the boot loader back onto the board. The boot loader source code and compiled image can be found in the MPIDE software download. You may also download it from the Max32 product page [[http://store.digilentinc.com/chipkit-max32-microcontroller-board-with-mega-r3-headers/|here]]. Once you have the boot loader .hex file, complete the following steps to reload the boot loader to the PIC32 microcontroller using MPLAB® X.+Using the Microchip development tools to program the Max32 board will cause the boot loader to be erased. To use the board with the MPIDE again, it is necessary to program the boot loader back onto the board. The boot loader source code and compiled image can be found in the MPIDE software download. Once you have the boot loader .hex file, complete the following steps to reload the boot loader to the PIC32 microcontroller using MPLAB® X.
   - Open MPLAB X. Click on "File", highlight "Import", and then click "HEX/ELF...(Prebuilt) File"{{ :chipkit_max32:bl_import.png?nolink |}}   - Open MPLAB X. Click on "File", highlight "Import", and then click "HEX/ELF...(Prebuilt) File"{{ :chipkit_max32:bl_import.png?nolink |}}
   - Click on "Browse"and search for the arduino-bootloader.X.Max32.hex file you downloaded from the webpage. (If you have more than one board from the family, it may be helpful to store all of your applicable boot loaders in one common file.)   - Click on "Browse"and search for the arduino-bootloader.X.Max32.hex file you downloaded from the webpage. (If you have more than one board from the family, it may be helpful to store all of your applicable boot loaders in one common file.)