Microblaze Quick Reference Guide Supplement

This guide describes how to install Digilent board support into Vivado so that the instructions described in the MicroBlaze Soft Processor Quick Reference Guide can be followed.

– Add link to MicroBlaze Soft Processor Quick Reference Guide

1. Download the design package zip file. – Add link and change this step to properly reflect if board packages are separate downloads
2. Unzip the package to a location of your choice.
3. Start Vivado.
4. At the Vivado tcl console source the top-level init.tcl file using this command:

source <Location of Unzipped Package>/Digilent_MicroBlaze_Designs/init.tcl

Now you should be able to begin at the second step under Hardware Development on the Quick Start Guide (Choose Create Project).

For additional materials, see the Resource center for you development board, accessible from here: FPGA/Zynq Resource Centers