Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:software:tutorials:vivado-quick-reference-guide:start [2017/10/03 21:12] – sbobrowiczlearn:software:tutorials:vivado-quick-reference-guide:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
 ====== Microblaze Quick Reference Guide Supplement ====== ====== Microblaze Quick Reference Guide Supplement ======
  
-This guide describes how to install board support and example designs for Digilent development boards into Vivado. This will allow the instructions described in the Hardware Development section of the MicroBlaze Soft Processor Quick Reference Guide to be completed.+This guide describes how to install board support and example designs for Digilent Arty S7 and Arty development boards into Vivado. This will allow the instructions described in the MicroBlaze Soft Processor Quick Reference Guide to be completed. 
 + 
 +===== Prerequisites ===== 
 +  * This guide requires an installation of Vivado 2017.4
  
 ===== Download ===== ===== Download =====
  
-{{ :learn:software:tutorials:vivado-quick-reference-guide:digilent_microblaze_designs.zip |Digilent Example Designs}}+  * {{ https://s3-us-west-2.amazonaws.com/digilent/Software/Microblaze/digilent_presets_2017.4-2.zip |Digilent Example Designs}}
  
 ===== Procedure ===== ===== Procedure =====
Line 14: Line 17:
   - At the Vivado tcl console source the top-level init.tcl file using this command:   - At the Vivado tcl console source the top-level init.tcl file using this command:
  
-  source <Location of Unzipped Package>/Digilent_MicroBlaze_Designs/init.tcl+<code>source <Location of Unzipped Package>/Digilent_Presets_2017.4/init.tcl</code> 
 +   
 +Now you should be able to begin at the second step under Hardware Development on the Quick Start Guide (Choose **Create Project**).  
 + 
 +To follow the steps in the Software Development section with a pre-built hardware platform, you will first need to install the SDK repository also included with the package above. You can install the repository by doing the following: 
 + 
 +  - Open Xilinx SDK and create a new workspace. 
 +  - Click Xilinx --> Repositories 
 +  - Create a New Global Repository 
 +  - Browse to <Location of Unzipped Package>/Digilent_Presets_2017.4/MicroBlaze_SDK_Repository 
 +  - Click OK to create the new repository, and OK again to close the Repositories window.
  
-Now you should be able to begin at the second step under Hardware Development on the Quick Start Guide (Choose **Create Project**).+You can now use the predefined hardware platforms for Digilent boards and also some Digilent provided Application program templates, including a Free RTOS demo and a standalone LED guessing game.
  
 ===== Additional materials =====  ===== Additional materials ===== 
  
-For additional materials, including more in-depth MicroBlaze tutorials, see the Resource center for you development board, accessible from here: [[https://reference.digilentinc.com/reference/programmable-logic/start| FPGA/Zynq Resource Centers]]+For additional materials, including more in-depth Vivado tutorials, see the Resource center for you development board, accessible from here: [[/programmable-logic/start| FPGA/Zynq Resource Centers]]