Getting Started with Zynq Servers

This guide will provide a step by step walk-through of creating a Microblaze based hardware design using the Vivado IP Integrator that will build over the Getting Started with Zynq guide by making use of the on-board Ethernet port and GPIOs for the Zybo FPGA board.

At the end of this tutorial you will have a comprehensive hardware design for Nexys4 DDR that makes use of various Hardware ports on the Zybo which are managed by the Zynq Softcore Processor block.

• Digilent's Zybo Development Board and a Micro USB cable for UART communication and JTAG programming

• Xilinx Vivado 2015.X with the SDK package.

• Zybo Support Files
  • These files will describe GPIO interfaces on your board and make it easier to select your board in the initial design setup and add GPIO IP blocks in the block design
  • Follow this Wiki guide Vivado Board Files for Digilent 7-Series FPGA Boards on how to install Board Support Files for Vivado 2015.X