Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:start [2017/01/18 22:39] – [12. Testing the Server with Tera Term] jon peyronlearn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 148: Line 148:
 > >
 >If for example, you also have another hardware design in the //Project Explorer// window, then you will also see this design name in the Target Hardware drop down selection list.  >If for example, you also have another hardware design in the //Project Explorer// window, then you will also see this design name in the Target Hardware drop down selection list. 
->+
 >Since we only have one hardware design  **design_1_wrapper_hw_platform_0** this will be our target hardware.  Select **Create New** under **Board Support Package**. The tool will automatically populate the **Board Support Package** name to match with the give project name. Click **Next**. >Since we only have one hardware design  **design_1_wrapper_hw_platform_0** this will be our target hardware.  Select **Create New** under **Board Support Package**. The tool will automatically populate the **Board Support Package** name to match with the give project name. Click **Next**.
 > >
Line 158: Line 158:
 >{{:learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:echo_server_zynq_6.jpg?direct&600|}} >{{:learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:echo_server_zynq_6.jpg?direct&600|}}
  
->8.3) After completing the previous step, you will see two new folders in the //Project Explorer// panel. **echo** which contains all the binaries, .c and .h (Header) files, and **echo_bsp** which is the board support folder. +>8.3) After completing the previous step, you will see two new folders in the //Project Explorer// panel. **echo** which contains all the binaries, .c and .h (Header) files, and **echo_bsp** which is the board support folder. **echo** is our main working source folder. This also contains an important file shown here in the src folder called //lscript.ld//. This is a Xilinx auto generated linker script file.  
-**echo** is our main working source folder. This also contains an important file shown here in the src folder called //lscript.ld//. This is a Xilinx auto generated linker script file. + 
 +>8.4) Next expand the echo_bsp click on system.mss and select "modify this BSP's Settings" 
 +>{{:learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:zybo_gswz_server_2.jpg?600|}} 
 + 
 +>8.5) Next select lwip141 and expand temac_adapter_options. Then in the phy_linkspeed parameter select 1000 Mbps(CONFIG_LINKSPEED1000), click ok. 
 +>{{:learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:zybo_gswz_server.jpg?600|}} 
 +<WRAP round tip 55%> 
 +You may need set the phy_linkspeed parameter to 100 Mbps(CONFIG_LINKSPEED100) based on your router settings. 
 +</WRAP> 
  
 ---- ----
Line 207: Line 216:
 >11.1) In the console window at the bottom of the screen the details of the connection will be displayed. >11.1) In the console window at the bottom of the screen the details of the connection will be displayed.
 > >
->{{:learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:echo_server_zynq_2.jpg?direct&600|}}+>{{:learn:programmable-logic:tutorials:zybo-getting-started-with-zynq-server:zybo_gswz_server_1.jpg?800|}}
  
 ---- ----