Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:start [2019/08/29 17:36] – Arthur Brownlearn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== ZedBoard FMC Pcam Adapter Two Camera Demo (Under Construction) ======+====== ZedBoard FMC Pcam Adapter Two Camera Demo ======
  
 ===== Overview ===== ===== Overview =====
  
-{{ :learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:full-demo.png?nolink&600 |}}+{{ :learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:full-demo.png |}}
  
 //Fig.1 The demo in action - displaying data from both Pcam 5Cs.// //Fig.1 The demo in action - displaying data from both Pcam 5Cs.//
Line 85: Line 85:
 >Finally, after both cameras have been connected, connect the FMC connector to the ZedBoard. To ensure that it stays firmly in place, one to two bolts should be used, as seen in the image below. >Finally, after both cameras have been connected, connect the FMC connector to the ZedBoard. To ensure that it stays firmly in place, one to two bolts should be used, as seen in the image below.
 >  > 
->{{ :learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:final-setup.png?nolink&600 |}}+>{{ :learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:final-setup.png?600 |}}
 > >
 >//Fig.5 Final setup// >//Fig.5 Final setup//
Line 102: Line 102:
  
 >As stated above, if a camera is unconnected, the Zedboard will continue the initialization of the rest of the cameras, and the VGA monitor will output a gray image in that camera's region, indicating the lack of video data in the DDR memory. >As stated above, if a camera is unconnected, the Zedboard will continue the initialization of the rest of the cameras, and the VGA monitor will output a gray image in that camera's region, indicating the lack of video data in the DDR memory.
-{{ :learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:port-b-disconnected.png?nolink&600 |}}+{{ :learn:programmable-logic:tutorials:zedboard-fmc-pcam-adapter-dual-camera-demo:port-b-disconnected.png?600 |}}
 > >
 >//Fig.6 Output VGA image with the camera A disconnected// >//Fig.6 Output VGA image with the camera A disconnected//
  
 {{tag>learn programmable-logic project add-ons pcam-5c fmc-pcam-adapter zedboard}} {{tag>learn programmable-logic project add-ons pcam-5c fmc-pcam-adapter zedboard}}