Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
learn:programmable-logic:tutorials:cmod-a7-user-demo:start [2017/05/31 18:55] – [Download and Launch the Zybo DMA Audio Demo] Arthur Brownlearn:programmable-logic:tutorials:cmod-a7-user-demo:start [2022/10/04 11:38] (current) – external edit 127.0.0.1
Line 44: Line 44:
  
 ===== Downloads ===== ===== Downloads =====
-Cmod A7 15T Project Repository -- [[https://github.com/Digilent/Cmod-A7-15T-OOB/releases/download/v2016.4-1/Cmod-A7-15T-OOB-2016.4-1.zip|ZIP Archive]] [[https://github.com/Digilent/Cmod-A7-15T-OOB|GIT Repo]]+Cmod A7 15T OOB Project Repository -- [[https://github.com/Digilent/Cmod-A7-15T-OOB/releases/download/v2016.4-1/Cmod-A7-15T-OOB-2016.4-1.zip|ZIP Archive]] [[https://github.com/Digilent/Cmod-A7-15T-OOB|GIT Repo]]
  
-Cmod A7 35T Project Repository -- [[https://github.com/Digilent/Cmod-A7-35T-OOB/releases/download/v2016.4-1/Cmod-A7-35T-OOB-2016.4-1.zip|ZIP Archive]] [[https://github.com/Digilent/Cmod-A7-35T-OOB|GIT Repo]]+Cmod A7 35T OOB Project Repository -- [[https://github.com/Digilent/Cmod-A7-35T-OOB/releases/download/v2018.2-1/Cmod-A7-35T-OOB-2018.2-1.zip 
 +|ZIP Archive]] [[https://github.com/Digilent/Cmod-A7-35T-OOB|GIT Repo]]
 ------- -------
-===== Download and Launch the Zybo DMA Audio Demo ===== 
  
->1) Follow the [[:learn:programmable-logic:tutorials:github-demos:start:|Using Digilent Github Demo Projects]] Tutorial. Since this is a Vivado SDK Project, you can either directly launch SDK and import the hardware handoff, or you can generate a bitstream in Vivado before launching SDK. Select the hardware handoff options in the tutorial if you don't want to modify the project block design later. Return to this guide when prompted to check for additional hardware requirements and setup. Make sure that you download the version of the project that applies to your specific board - the 15T or 35T version.+ 
 +===== Download and Launch the Cmod A7 Out of Box Demo ===== 
 + 
 +>1) Follow the [[:learn:programmable-logic:tutorials:github-demos:start:|Using Digilent Github Demo Projects]] Tutorial. Since this is a Vivado SDK Project, you can either directly launch SDK and import the hardware handoff, or you can generate a bitstream in Vivado before launching SDK. Select the hardware handoff options in the tutorial if you don't want to modify the project block design later. Return to this guide when prompted to check for additional hardware requirements and setup. 
 +> 
 +><WRAP round important 660px> 
 +===Important=== 
 +Make sure that between the 15T and 35T versions of the project, you download the version that applies to your Cmod A7. 
 +</WRAP>
  
 >2) In order to fully use the demo, you will need to connect a serial terminal to your Cmod A7. Plug your board into your computer with a Micro USB cable and make sure it has power. Then open a serial terminal (such as TeraTerm) on your computer. In the terminal application setup the serial port to connect to the appropriate port for your board, with a baud rate of 9600. Then return to the Github Projects Tutorial to finish programming and running the demo. >2) In order to fully use the demo, you will need to connect a serial terminal to your Cmod A7. Plug your board into your computer with a Micro USB cable and make sure it has power. Then open a serial terminal (such as TeraTerm) on your computer. In the terminal application setup the serial port to connect to the appropriate port for your board, with a baud rate of 9600. Then return to the Github Projects Tutorial to finish programming and running the demo.
Line 76: Line 84:
 >{{:cmod_a7:user_uart2.jpg?200|}} >{{:cmod_a7:user_uart2.jpg?200|}}
  
-{{tag>learn programmable-logic tutorial cmod-a7}}+{{tag>learn programmable-logic project cmod-a7}}